STWD100NPWY3F
ActiveWATCHDOG TIMER, 2.7 V TO 5.5 V SUPPLY, 3.4 MS/6.3 MS/102 MS/1.6 S, ACTIVE-LOW, OPEN-DRAIN, SOT-23-5
Deep-Dive with AI
Search across all available documentation for this part.
STWD100NPWY3F
ActiveWATCHDOG TIMER, 2.7 V TO 5.5 V SUPPLY, 3.4 MS/6.3 MS/102 MS/1.6 S, ACTIVE-LOW, OPEN-DRAIN, SOT-23-5
Deep-Dive with AI
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.12 | |
| 10 | $ 1.00 | |||
| 25 | $ 0.95 | |||
| 100 | $ 0.78 | |||
| 250 | $ 0.73 | |||
| 500 | $ 0.64 | |||
| 1000 | $ 0.51 | |||
| Digi-Reel® | 1 | $ 1.12 | ||
| 10 | $ 1.00 | |||
| 25 | $ 0.95 | |||
| 100 | $ 0.78 | |||
| 250 | $ 0.73 | |||
| 500 | $ 0.64 | |||
| 1000 | $ 0.51 | |||
| Tape & Reel (TR) | 3000 | $ 0.47 | ||
| 6000 | $ 0.45 | |||
| 15000 | $ 0.43 | |||
Description
General part information
STWD100 Series
The STWD100 watchdog timer circuits are self-contained devices which prevent system failures that are caused by certain types of hardware errors (such as, non-responding peripherals and bus contention) or software errors (such as a bad code jump and a code stuck in loop).
The STWD100 watchdog timer has an input, WDI, and an output,WDO. The input is used to clear the internal watchdog timer periodically within the specified timeout period, twd. While the system is operating correctly, it periodically toggles the watchdog input, WDI. If the system fails, the watchdog timer is not reset, a system alert is generated and the watchdog output,WDO, is asserted.
The STWD100 circuit also has an enable pin,EN, which can enable or disable the watchdog functionality. TheENpin is connected to the internal pull-down resistor. The device is enabled if theENpin is left floating.
Documents
Technical documentation and resources