LM358QT
ActiveLOW-POWER DUAL OP-AMPS WITH LOW INPUT BIAS CURRENT
Deep-Dive with AI
Search across all available documentation for this part.
LM358QT
ActiveLOW-POWER DUAL OP-AMPS WITH LOW INPUT BIAS CURRENT
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LM358QT |
|---|---|
| Amplifier Type | General Purpose |
| Current - Input Bias | 20 nA |
| Current - Output / Channel [custom] | 40 mA |
| Current - Supply | 700 µA |
| Gain Bandwidth Product | 1.1 MHz |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Number of Circuits | 2 |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 8-UFDFN Exposed Pad |
| Qualification | AEC-Q100 |
| Slew Rate | 0.6 V/µs |
| Supplier Device Package | 8-DFN (2x2) |
| Voltage - Input Offset | 2 mV |
| Voltage - Supply Span (Max) [Max] | 30 V |
| Voltage - Supply Span (Min) [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.48 | |
| 10 | $ 0.41 | |||
| 25 | $ 0.39 | |||
| 100 | $ 0.31 | |||
| 250 | $ 0.29 | |||
| 500 | $ 0.24 | |||
| 1000 | $ 0.19 | |||
| Digi-Reel® | 1 | $ 0.48 | ||
| 10 | $ 0.41 | |||
| 25 | $ 0.39 | |||
| 100 | $ 0.31 | |||
| 250 | $ 0.29 | |||
| 500 | $ 0.24 | |||
| 1000 | $ 0.19 | |||
| Tape & Reel (TR) | 3000 | $ 0.17 | ||
| 6000 | $ 0.16 | |||
| 15000 | $ 0.15 | |||
| 30000 | $ 0.14 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 0.33 | |
| 10 | $ 0.20 | |||
| 25 | $ 0.19 | |||
| 50 | $ 0.18 | |||
| 100 | $ 0.17 | |||
| 250 | $ 0.16 | |||
| 500 | $ 0.16 | |||
| 1000 | $ 0.15 | |||
Description
General part information
LM358A Series
These circuits consist of two independent, high-gain, internally frequency-compensated op amps, specifically designed to operate from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage.
Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits, which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied with the standard 5 V, which is used in logic systems and will easily provide the required interface electronics with no additional power supply.
In linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage.
Documents
Technical documentation and resources