The LTC1066-1 is an 8th order elliptic lowpass filter which simultaneously provides clock-tunability and DC accuracy. The unique and proprietary architecture of the filter allows 14 bits of DC gain linearity and a maximum of 1.5mV DC offset. An external RC is required for DC accurate operation. With ±7.5V supplies, a 20k resistor and a 1µF capacitor, the cutoff frequency can be tuned from 800Hz to 100kHz. A clock-tunable 10Hz to 100kHz operation can also be achieved (see Typical Application section).The filter does not require any external active components such as input/output buffers. The input/output impedance is 500MΩ/0.1Ω and the output of the filter can source or sink 40mA. When pin 8 is connected to V+, the clock-to-cutoff frequency ratio is 50:1 and the input signal is sampled twice per clock cycle to lower the risk of aliasing. For frequencies up to 0.75fCUTOFF, the passband ripple is ±0.15dB. The gain at fCUTOFFis -1dB and the filter’s stopband attenuation is 80dB at 2.3fCUTOFF. Linear phase operation is also available with a clock-to-cutoff frequency ratio of 100:1 when pin 8 is connected to ground.The LTC1066-1 is available in an 18-pin SO Wide package..ApplicationsInstrumentationData Acquisition SystemsAnti-Aliasing FiltersSmoothing FiltersAudio Signal Processing