Zenode.ai Logo
ANALOG DEVICES LTC2309IUF#PBF
Integrated Circuits (ICs)

LTC3769IUF#PBF

Active
Analog Devices Inc./Maxim Integrated

DC/DC CONTROLLER, SYNCHRONOUS BOOST, 4.5V TO 60V SUPPLY, 1 OUTPUT, 96% DUTY CYCLE, 760KHZ, QFN-EP-24

ANALOG DEVICES LTC2309IUF#PBF
Integrated Circuits (ICs)

LTC3769IUF#PBF

Active
Analog Devices Inc./Maxim Integrated

DC/DC CONTROLLER, SYNCHRONOUS BOOST, 4.5V TO 60V SUPPLY, 1 OUTPUT, 96% DUTY CYCLE, 760KHZ, QFN-EP-24

Technical Specifications

Parameters and characteristics for this part

SpecificationLTC3769IUF#PBF
Clock SyncNo
Control FeaturesSoft Start, Current Limit, Frequency Control, Enable, Power Good
Duty Cycle (Max)96 %
Frequency - Switching (Max)760 kHz
Frequency - Switching (Min)105 kHz
FunctionStep-Up, Step-Up/Step-Down
Mounting TypeSurface Mount
Number of Outputs1
Operating Temperature (Max)125 °C
Operating Temperature (Min)-40 °C
Output ConfigurationPositive
Output Phases1
Output TypeTransistor Driver
Package / Case24-WFQFN Exposed Pad
Package Length4 mm
Package Name24-QFN
Package Width4 mm
Synchronous RectifierYes
TopologySEPIC, Boost
Voltage - Supply (Vcc/Vdd) Maximum60 V
Voltage - Supply (Vcc/Vdd) Minimum4.5 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$Updated
DigikeyTube 1$ 10.571w
10$ 8.26
91$ 7.08
182$ 6.83
273$ 6.71
546$ 6.53
1001$ 6.40
NewarkEach 1$ 10.581w
10$ 8.26
25$ 7.86
50$ 7.47
182$ 7.08

CAD

3D models and CAD resources for this part

Description

General part information

LTC3769 Series

LTC®3769 is a high performance single output synchronous boost converter controller that drives an all N-channel power MOSFET stage. Synchronous rectification increases efficiency, reduces power losses and eases thermal requirements, simplifying high power boost applications. The 28µA no-load quiescent current extends operating run time in battery-powered systems. A 4.5V to 60V input supply range encompasses a wide range of system architectures and battery chemistries. When biased from the output of the boost converter or another auxiliary supply, this can operate from an input supply as low as 2.3V after start-up. The operating frequency can be set within a 50KHz to 900KHz range or synchronized to an external clock using the internal PLL. The SS pin ramps the output voltage during start-up. The PLLIN/MODE pin selects Burst Mode® operation, pulseskipping mode or forced continuous mode at light loads. Typical applications are industrial, medical, military.