
ISL78264ARZ-T
ActiveAUTOMOTIVE DUAL SYNCHRONOUS BUCK CONTROLLER WITH INTEGRATED DRIVERS

ISL78264ARZ-T
ActiveAUTOMOTIVE DUAL SYNCHRONOUS BUCK CONTROLLER WITH INTEGRATED DRIVERS
Description
General part information
ISL78264 Series
The ISL78264 is a dual buck controller that can operate across a wide VINrange of 3.75V to 42V. It is designed to support wide duty-cycle operation for switching frequencies from 200kHz up to 2.2MHz. To mitigate EMI, it supports synchronization to an external clock or programmable spread spectrum clocking. Its current-mode modulator is ideally suited to tolerate severe line transients. Also, the ISL78264 supports dropout operation and low 25ns on-time to operate through automotive cranking and load dump pulses.
The ISL78264 integrates robust MOSFET drivers and readily supports step-down applications requiring high output currents in normal operation. For applications that must also sustain extremely low power, always-on operation, its energy conservation mode can reduce operating current to 6µA. Integrated feedback for VOUT1 is provided for 3.3V or 5V applications to eliminate the current otherwise flowing in external feedback resistors. An automatic switchover to an external supply is also supported to maximize efficiency. A blocking diode is activated after startup to prevent the external supply from back-biasing a low input voltage at VIN.
The ISL78264 is qualified to AEC-Q100 Grade 1, specified to operate across an ambient temperature range of -40 °C to 125 °C, and is available in a 5mm x 5mm, 32 Ld WFQFN (Wettable Flank) package.
Technical Specifications
Parameters and characteristics for this part
| Specification | ISL78264ARZ-T |
|---|---|
| Clock Sync | Yes |
| Control Features | Power Good, Enable, Current Limit, Soft Start, Frequency Control, Sync |
| Duty Cycle (Max) | 98.75 % |
| Frequency - Switching (Max) | 2.2 MHz |
| Frequency - Switching (Min) | 200 kHz |
| Function | Step-Down |
| Grade | Automotive |
| Mounting Type | Wettable Flank, Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature (Max) | 125 °C |
| Operating Temperature (Min) | -40 °C |
| Output Configuration | Positive |
| Output Phases | 1 |
| Output Type | Transistor Driver |
| Package / Case | 32-VFQFN Exposed Pad |
| Package Length | 5 mm |
| Package Name | 32-QFN |
| Package Width | 5 mm |
| Qualification | AEC-Q100 |
| Synchronous Rectifier | Yes |
| Topology | Buck |
| Voltage - Supply (Vcc/Vdd) Maximum | 42 V |
| Voltage - Supply (Vcc/Vdd) Minimum | 3.75 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Sign in to see pricing
Create a free account to access distributor pricing data.
CAD
3D models and CAD resources for this part
Documents
Technical documentation and resources