SmartMesh IPwireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes.The LTP5902-IPM is printed circuit board assembly (PCBA) product with on-board chip antenna in the Eterna®family of IEEE 802.15.4e solutions, featuring a highly integrated, low power radio design as well as an ARM Cortex-M3 32-bit microprocessor running SmartMesh IP embedded networking software. The LTP5902-IPM, at 37mm × 24mm, is built for surface-mount assembly.With SmartMesh IP time-synchronized networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. SmartMesh IP is a highly flexible network with proven reliability and low power performance in an easy-to-integrate platform.The LTP5902-IPM’s behavior in a SmartMesh IP network is determined by the choice of SmartMesh IP network software loaded:Wireless Mote, EManager, Access Point Mote in a SmartMesh IP network. The SmartMesh IP software provided with the LTP5902-IPM is fully tested and validated, and is readily configured via a software Application Programming Interface. Once you have purchased SmartMesh IP products, the SmartMesh IP stack binaries may be downloaded via your myAnalog account.The pin signaling behavior of the LTP5902IPC-IPMA hardware is determined by the software loaded and is described in detail in the following product datasheets:LTP5902-IPM=LTP5902IPC-IPMA hardware+SmartMesh IP MoteSoftware→LTP5902-IPM DatasheetLTP5902-IPR=LTP5902IPC-IPMA hardware+SmartMesh IP EManagerSoftware→LTP5902-IPR DatasheetLTP5902-IPA=LTP5902IPC-IPMA hardware+SmartMesh IP Access PointSoftware→LTP5902-IPA DatasheetNetwork FeaturesFeatureBenefit>99.999% Network ReliabilityAvoids communications dropouts common with other wireless networksNIST-certified AES-128 bit EncryptionData protected by end-to-end encryption, message integrity checking and device authenticationScalableUses time-slotted channel-hopping protocol to avoid in-network collisions to maximize scale while minimizing power and latency-hungry transmission retries due to congestionBidirectional CommunicationsIdeal for both monitoring and control applicationsUp to 10 messages/second/nodeTime-slotted communications avoids contention. This data rate includes built-in margin for packet retries.Device FeaturesFeatureBenefitIndustry-Leading Low Power Radio Technology• 4.5mA to Receive a Packet• 5.4mA to Transmit at 0dBm• 9.7mA to Transmit at 8dBmPre-engineered RFRF elements include an on-chip power amplifier and are pre-tuned for optimized performance, including temperature compensation, saving development time.RF Modular CertificationsPre-certified inUSA, Canada, EU, Australia/New Zealand, India, Japan, Korea, TaiwanEnergy Harvesting SupportVery low power design enables motes to be powered by a wide variety of energy harvesters. Clickhereto see a demonstration circuit of a SmartMesh IP mote powered by indoor light.Integrated Temperature SensorPrecise temperature sensor is integrated directly into the mote.ApplicationsSmartMesh IP is ideally suited for wireless Industrial Internet of Things (IoT) applications.To learn more about SmartMesh applications, click here.