The ADG794 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on-resistance variation is typically less than 1.2 Ω over the input signal range.The bandwidth of the ADG794 is typically 300 MHz and this, coupled with low distortion (typically 0.68%), makes the part suitable for switching analog audio/video signals.The ADG794 operates from a single 3.3 V/5 V supply and is TTL logic compatible. The switches are controlled by the logic inputs IN andENas shown in Table 4. TheENpin allows the user to disable all switches.These switches conduct equally well in both directions when on. In the off condition, signal levels up to the supplies are blocked. The ADG794 switches exhibit break-before-make switching action.The ADG794 is available in a 16-pin QSOP package.PRODUCT HIGHLIGHTSWide bandwidth: 300 MHz.Ultralow power dissipation.Crosstalk: −70 dB (typical) at 10 MHz.Off isolation: −65 dB (typical) at 10 MHz.ESD protection tested as per ESD Association Standards:2 kV HBM (ANSI/ESD STM5.1-2001)200 V MM (ANSI/ESD STM5.2-1999)1 kV FICDM (ANSI/ESD STM5.3.1-1999)APPLICATIONSRGB switchesHDTVDVD-RAudio/video switches