
LT3689IMSE#TRPBF
Active700MA STEP-DOWN REGULATOR WITH POWER-ON RESET AND WATCHDOG TIMER
Deep-Dive with AI
Search across all available documentation for this part.

LT3689IMSE#TRPBF
Active700MA STEP-DOWN REGULATOR WITH POWER-ON RESET AND WATCHDOG TIMER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LT3689IMSE#TRPBF |
|---|---|
| Current - Output | 700 mA |
| Frequency - Switching [Max] | 2 MHz |
| Frequency - Switching [Min] | 500 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | Exposed Pad, 16-TFSOP |
| Package / Case | 3 mm, 0.118 in |
| Supplier Device Package | 16-MSOP-EP |
| Synchronous Rectifier | False |
| Topology | Buck |
| Voltage - Input (Max) [Max] | 36 V |
| Voltage - Input (Min) [Min] | 3.6 V |
| Voltage - Output (Max) | 36 V |
| Voltage - Output (Min/Fixed) | 0.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2500 | $ 4.91 | |
Description
General part information
LT3689LT3689-5 Series
The LT3689 is an adjustable frequency (350kHz to 2.2MHz) monolithic step-down switching regulator with a power-on reset and watchdog timer. The regulator operates from inputs up to 36V and withstands transients up to 60V. Low ripple Burst Mode®operation maintains high efficiency at low output current while keeping output ripple below 15mV in a typical application, with input quiescent current of just 85μA. Shutdown circuitry reduces input supply current to less than 1μA while EN/UVLO is pulled low. Using a resistor divider on the EN/UVLO pin provides a programmable undervoltage lockout. Current limit, frequency foldback and thermal shutdown provide fault protection.The reset and watchdog timeout periods are independently adjustable using external capacitors. Tight accuracy specifications and glitch immunity ensure reliable reset operation of a system without false triggering. The open collectorRSTwill pull down if output voltage drops 10% below the programmed value. The watchdog timer is pin-selectable for window or timeout modes. In timeout mode,WDOpulls low if too long of a period passes before a watchdog transition is detected. In window mode, the LT3689 monitors for WDI falling edges grouped too close together or too far apart.ApplicationsAutomotive Electronic Control UnitsIndustrial Power Supplies
Documents
Technical documentation and resources