VNH7070BASTR
ActiveAUTOMOTIVE FULLY INTEGRATED H-BRIDGE MOTOR DRIVER
Deep-Dive with AI
Search across all available documentation for this part.
VNH7070BASTR
ActiveAUTOMOTIVE FULLY INTEGRATED H-BRIDGE MOTOR DRIVER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | VNH7070BASTR | VNH7070BAS Series |
|---|---|---|
| - | - | |
| Current - Output | 15 A | 15 A |
| Function | Driver - Fully Integrated, Control and Power Stage | Driver - Fully Integrated, Control and Power Stage |
| Grade | Automotive | Automotive |
| Interface | PWM | PWM |
| Motor Type - AC, DC | Brushed DC | Brushed DC |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature [Max] | 150 °C | 150 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Half Bridge (2) | Half Bridge (2) |
| Package / Case | 16-SOIC | 16-SOIC |
| Package / Case [x] | 0.154 in | 0.154 in |
| Package / Case [y] | 3.9 mm | 3.9 mm |
| Qualification | AEC-Q100 | AEC-Q100 |
| Supplier Device Package | 16-SO | 16-SO |
| Technology | Power MOSFET | Power MOSFET |
| Voltage - Load [Max] | 28 V | 28 V |
| Voltage - Load [Min] | 4 V | 4 V |
| Voltage - Supply [Max] | 28 V | 28 V |
| Voltage - Supply [Min] | 4 V | 4 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
VNH7070BAS Series
Automotive fully integrated H-bridge motor driver
| Part | Interface | Current - Output | Motor Type - AC, DC | Function | Operating Temperature [Max] | Operating Temperature [Min] | Supplier Device Package | Mounting Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Output Configuration | Voltage - Load [Min] | Voltage - Load [Max] | Grade | Technology | Package / Case | Package / Case [x] | Package / Case [y] | Qualification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics VNH7070BASTR | |||||||||||||||||||
STMicroelectronics VNH7070BASTR | |||||||||||||||||||
STMicroelectronics VNH7070BASTR | PWM | 15 A | Brushed DC | Driver - Fully Integrated, Control and Power Stage | 150 °C | -40 °C | 16-SO | Surface Mount | 4 V | 28 V | Half Bridge (2) | 4 V | 28 V | Automotive | Power MOSFET | 16-SOIC | 0.154 in | 3.9 mm | AEC-Q100 |
Description
General part information
VNH7070BAS Series
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches.
Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower®M0-7 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in SO-16N package on electrically isolated lead-frames.
Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. The input signals INAand INBcan directly interface the microcontroller to select the motor direction and the brake condition. A SEL0 pin is available to address the information available on the CS to the microcontroller. The CS pin allows to monitor the motor current by delivering a current proportional to the motor current value. The PWM, up to 20 kHz, allows to control the speed of the motor in all possible conditions. In all cases, a low level state on the PWM pin turns off both the LSAand LSBswitches.
Documents
Technical documentation and resources