
MAX14720EEWA+T
ObsoleteIC REG SGL BUCK/BST/LINEAR 25WLP

MAX14720EEWA+T
ObsoleteIC REG SGL BUCK/BST/LINEAR 25WLP
Description
General part information
MAX14720 Series
The MAX14720/MAX14750 are compact power-management solutions for space-constrained, battery-powered applications where size and efficiency are critical. Both devices integrate a power switch, a linear regulator, a buck regulator, and a buck-boost regulator.The MAX14720 is designed to be the primary power-management device and is ideal for either non-rechargeable battery (coin-cell, dual alkaline) applications or for rechargeable solutions where the battery is removable and charged separately. The device includes a button monitor and sequencer.The MAX14750 works well as a companion to a charger or PMIC in rechargeable applications. It provides direct pin control of each function and allows greater flexibility for controlling sequencing.The devices include two programmable micro-IQ, high-efficiency switching converters: a buck-boost regulator and a synchronous buck regulator. These regulators feature a burst mode for increased efficiency during light-load operation.The low-dropout linear regulator has a programmable output. It can also operate as a power switch that can disconnect the quiescent load of system peripherals.The devices also include a power switch with battery-monitoring capability. The switch can isolate the battery from all system loads to maximize battery life when not operating. It is also used to isolate the battery-impedance measurements. This switch can operate as a general-purpose load switch as well.The MAX14720 includes a programmable power controller that allows the device to be configured either for use in applications that require a true off state or for always-on applications. This controller provides a delayed reset signal, voltage sequencing, and customized button timing for on/off control and recovery hard reset.Both devices also include a multiplexer for monitoring the power inputs and outputs of each function.These devices are available in a 25-bump, 0.4mm pitch, 2.26mm x 2.14mm wafer-level package (WLP) and operate over the -40°C to +85°C extended temperature range.Design Solution: How to Add ECG to Your Wearable Without Raising Your Heart Rate ›ApplicationsPortable Medical DevicesWearable Fitness DevicesWearable Medical Devices
Technical Specifications
Parameters and characteristics for this part
| Specification | MAX14720EEWA+T |
|---|---|
| Current - Output 2 | 250 mA |
| Current (Output 3) | 100 mA |
| Frequency - Switching | 2 MHz |
| Mounting Type | Surface Mount |
| Number of Outputs | 3 |
| Operating Temperature (Max) | 85 °C |
| Operating Temperature (Min) | -40 °C |
| Package / Case | 25-WFBGA, WLBGA |
| Package Length | 2.11 mm |
| Package Name | 25-WLP |
| Package Width | 2.23 mm |
| Topology | Step-Down (Buck) (1), Step-Down/Step-Up (Buck/Boost) (1), Linear (LDO) (1) |
| Voltage - Output 1 (Max) | 5 V |
| Voltage - Output 1 (Min) | 2.5 V |
| Voltage - Output 2 (Maximum) | 2 V |
| Voltage - Output 2 (Minimum) | 1 V |
| Voltage - Supply (Maximum) | 5.5 V |
| Voltage - Supply (Minimum) | 1.8 V |
| Voltage (Output 3) (Max) | 4 V |
| Voltage (Output 3) (Min) | 0.9 V |
| Voltage/Current - Output 1 Options | PROG |
| w/LED Driver | No |
| w/Sequencer | No |
| w/Supervisor | No |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Sign in to see pricing
Create a free account to access distributor pricing data.
CAD
3D models and CAD resources for this part
Documents
Technical documentation and resources