VNI2140J
ActiveDUAL HIGH SIDE SMART POWER SOLID STATE RELAY
Deep-Dive with AI
Search across all available documentation for this part.
VNI2140J
ActiveDUAL HIGH SIDE SMART POWER SOLID STATE RELAY
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | VNI2140J | VNI2140 Series |
|---|---|---|
| - | - | |
| Current - Output (Max) [Max] | 500 mA | 500 mA |
| Embedded | - | False |
| Fault Protection | Current Limiting (Fixed), Over Voltage, Over Temperature, Open Load Detect | Current Limiting (Fixed), Over Voltage, Over Temperature, Open Load Detect |
| Function | - | High Side Driver (Internal FET) |
| Input Type | Non-Inverting | Non-Inverting |
| Interface | On/Off | On/Off |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Outputs | 2 | 2 |
| Operating Temperature [Max] | 125 ¯C | 125 ¯C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | High Side | High Side |
| Output Type | N-Channel | N-Channel |
| Package / Case | 12-PowerLSOP | 12-PowerLSOP |
| Primary Attributes | - | 2-Channel (Dual) |
| Ratio - Input:Output [custom] | 1:1 | 1:1 |
| Rds On (Typ) | 80 mOhm | 80 mOhm |
| Secondary Attributes | - | Thermal, Short-Circuit, Undervoltage Protection |
| Supplied Contents | - | Board(s) |
| Supplier Device Package | PowerSSO-12™ | PowerSSO-12™ |
| Switch Type | General Purpose | General Purpose |
| Type | - | Power Management |
| Utilized IC / Part | - | VNI2140J |
| Voltage - Load [Max] | 45 V | 45 V |
| Voltage - Load [Min] | 9 V | 9 V |
| Voltage - Supply (Vcc/Vdd) | False | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 2.29 | |
| 10 | $ 2.06 | |||
| 25 | $ 1.95 | |||
| 100 | $ 1.69 | |||
| 300 | $ 1.60 | |||
| 500 | $ 1.52 | |||
VNI2140 Series
EVAL BOARD FOR VNI2140J
| Part | Supplied Contents | Secondary Attributes | Function | Primary Attributes | Utilized IC / Part | Type | Embedded | Output Type | Ratio - Input:Output [custom] | Fault Protection | Switch Type | Rds On (Typ) | Supplier Device Package | Package / Case | Output Configuration | Input Type | Interface | Mounting Type | Number of Outputs | Voltage - Load [Max] | Voltage - Load [Min] | Operating Temperature [Min] | Operating Temperature [Max] | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics STEVAL-IFP010V1 | Board(s) | Short-Circuit, Thermal, Undervoltage Protection | High Side Driver (Internal FET) | 2-Channel (Dual) | VNI2140J | Power Management | |||||||||||||||||||
STMicroelectronics VNI2140J | |||||||||||||||||||||||||
STMicroelectronics VNI2140J | N-Channel | 1:1 | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | General Purpose | 80 mOhm | PowerSSO-12™ | 12-PowerLSOP | High Side | Non-Inverting | On/Off | Surface Mount | 2 | 45 V | 9 V | -40 °C | 125 ¯C | 500 mA | ||||||||
STMicroelectronics VNI2140J |
Description
General part information
VNI2140 Series
The VNI2140J is a monolithic device designed using STMicroelectronics' VIPower technology.
The device drives two independent resistive or inductive loads with one side connected to ground. Active current limitation prevents a drop in system power supply in cases of shorted-load, and built-in thermal shutdown protects the chip from damage due to overtemperature and short-circuit.
In overload conditions, channel turns OFF and ON automatically to maintain the junction temperature between TTSDand TR. If the case temperature reaches TCSD, the overloaded channel is turned OFF and restarts only when case temperature decreases down to TCR. In order to avoid high-peak current from the supply, when more than one channel is overloaded the TCSDrestart is not simultaneous. Non overloaded channels continue to operate normally. The open-drain diagnostics output indicates overtemperature conditions and open-load in OFF-state.