ADM3202ARN
ActiveAnalog Devices Inc
IC TRANSCEIVER FULL 2/2 16SOIC
Deep-Dive with AI
Search across all available documentation for this part.
DocumentsDatasheet
ADM3202ARN
ActiveAnalog Devices Inc
IC TRANSCEIVER FULL 2/2 16SOIC
Deep-Dive with AI
DocumentsDatasheet
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | ADM3202ARN | ADM3202 Series |
|---|---|---|
| Data Rate | 460 Kbps | 460 Kbps |
| Duplex | Full | Full |
| Mounting Type | Surface Mount | Surface Mount, Through Hole |
| Number of Drivers/Receivers [custom] | 2 | 2 |
| Number of Drivers/Receivers [custom] | 2 | 2 |
| Operating Temperature [Max] | 85 °C | 85 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Package / Case | 16-SOIC | 16-SOIC, 16-TSSOP, 16-DIP |
| Package / Case | 3.9 mm Width, 0.154 in | 0.154 - 7.62 mm Width |
| Package / Case | - | 0.173 " |
| Package / Case | - | 4.4 mm |
| Protocol | RS232 | RS232 |
| Receiver Hysteresis | 400 mV | 400 mV |
| Supplier Device Package | 16-SOIC | 16-SOIC, 16-TSSOP, 16-PDIP |
| Type | Transceiver | Transceiver |
| Voltage - Supply [Max] | 5.5 V | 5.5 V |
| Voltage - Supply [Min] | 3 V | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
ADM3202 Series
High-Speed, 2-Channel RS232/V.28 Interface Devices
| Part | Receiver Hysteresis | Supplier Device Package | Voltage - Supply [Min] | Voltage - Supply [Max] | Protocol | Mounting Type | Operating Temperature [Min] | Operating Temperature [Max] | Duplex | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Type | Data Rate | Package / Case | Package / Case | Package / Case [x] | Package / Case [x] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices Inc ADM3202ARNZ-REEL7The ADM3202 /ADM3222/ADM1385are high speed, 2-channel RS232/V.28 interface devices which operate from a single +3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) makes them ideal for battery powered portable instruments.The ADM3202 / ADM3222 / ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Four external 0.1 µF charge pump capacitors are used for the voltage doubler/inverter permitting operation from a single +3.3 V supply.The ADM3222 / ADM1385 contain additional enable and shutdown circuitry. TheENinput may be used to three-state the receiver outputs. TheSDinput is used to power down the charge pump and transmitter outputs reducing the quiescent current to less than 1 µA. The receivers remain enabled during shutdown unless disabled usingEN.The ADM3202 is available in a 16-lead DIP, narrow and wide SO as well as a space saving TSSOP package. The ADM3222 is available in 18 lead DIP , SO and in 20 lead SSOP and TSSOP. The ADM1385 is available in a 20 lead SSOP package and is pin compatible with the LTC1385 CG.APPLICATIONSGeneral-purpose RS-232 data linkPortable instrumentsPrinters, palmtop computers, PDAs | 400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | 0.154 in, 3.9 mm Width | ||
400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | ||||
Analog Devices Inc ADM3202ARNZThe ADM3202 /ADM3222/ADM1385are high speed, 2-channel RS232/V.28 interface devices which operate from a single +3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) makes them ideal for battery powered portable instruments.The ADM3202 / ADM3222 / ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Four external 0.1 µF charge pump capacitors are used for the voltage doubler/inverter permitting operation from a single +3.3 V supply.The ADM3222 / ADM1385 contain additional enable and shutdown circuitry. TheENinput may be used to three-state the receiver outputs. TheSDinput is used to power down the charge pump and transmitter outputs reducing the quiescent current to less than 1 µA. The receivers remain enabled during shutdown unless disabled usingEN.The ADM3202 is available in a 16-lead DIP, narrow and wide SO as well as a space saving TSSOP package. The ADM3222 is available in 18 lead DIP , SO and in 20 lead SSOP and TSSOP. The ADM1385 is available in a 20 lead SSOP package and is pin compatible with the LTC1385 CG.APPLICATIONSGeneral-purpose RS-232 data linkPortable instrumentsPrinters, palmtop computers, PDAs | 400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | 0.154 in, 3.9 mm Width | ||
400 mV | 16-TSSOP | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-TSSOP | 0.173 " | 4.4 mm | ||
Analog Devices Inc ADM3202ANZThe ADM3202 /ADM3222/ADM1385are high speed, 2-channel RS232/V.28 interface devices which operate from a single +3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) makes them ideal for battery powered portable instruments.The ADM3202 / ADM3222 / ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Four external 0.1 µF charge pump capacitors are used for the voltage doubler/inverter permitting operation from a single +3.3 V supply.The ADM3222 / ADM1385 contain additional enable and shutdown circuitry. TheENinput may be used to three-state the receiver outputs. TheSDinput is used to power down the charge pump and transmitter outputs reducing the quiescent current to less than 1 µA. The receivers remain enabled during shutdown unless disabled usingEN.The ADM3202 is available in a 16-lead DIP, narrow and wide SO as well as a space saving TSSOP package. The ADM3222 is available in 18 lead DIP , SO and in 20 lead SSOP and TSSOP. The ADM1385 is available in a 20 lead SSOP package and is pin compatible with the LTC1385 CG.APPLICATIONSGeneral-purpose RS-232 data linkPortable instrumentsPrinters, palmtop computers, PDAs | 400 mV | 16-PDIP | 3 V | 5.5 V | RS232 | Through Hole | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-DIP | 0.3 in, 7.62 mm | ||
400 mV | 16-TSSOP | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-TSSOP | 0.173 " | 4.4 mm | ||
Analog Devices Inc ADM3202ARWZ-REEL7The ADM3202 /ADM3222/ADM1385are high speed, 2-channel RS232/V.28 interface devices which operate from a single +3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) makes them ideal for battery powered portable instruments.The ADM3202 / ADM3222 / ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Four external 0.1 µF charge pump capacitors are used for the voltage doubler/inverter permitting operation from a single +3.3 V supply.The ADM3222 / ADM1385 contain additional enable and shutdown circuitry. TheENinput may be used to three-state the receiver outputs. TheSDinput is used to power down the charge pump and transmitter outputs reducing the quiescent current to less than 1 µA. The receivers remain enabled during shutdown unless disabled usingEN.The ADM3202 is available in a 16-lead DIP, narrow and wide SO as well as a space saving TSSOP package. The ADM3222 is available in 18 lead DIP , SO and in 20 lead SSOP and TSSOP. The ADM1385 is available in a 20 lead SSOP package and is pin compatible with the LTC1385 CG.APPLICATIONSGeneral-purpose RS-232 data linkPortable instrumentsPrinters, palmtop computers, PDAs | 400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | |||
16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | 2 | 2 | Transceiver | 16-SOIC | |||||||||
Analog Devices Inc ADM3202ARNZ-REELThe ADM3202 /ADM3222/ADM1385are high speed, 2-channel RS232/V.28 interface devices which operate from a single +3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) makes them ideal for battery powered portable instruments.The ADM3202 / ADM3222 / ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Four external 0.1 µF charge pump capacitors are used for the voltage doubler/inverter permitting operation from a single +3.3 V supply.The ADM3222 / ADM1385 contain additional enable and shutdown circuitry. TheENinput may be used to three-state the receiver outputs. TheSDinput is used to power down the charge pump and transmitter outputs reducing the quiescent current to less than 1 µA. The receivers remain enabled during shutdown unless disabled usingEN.The ADM3202 is available in a 16-lead DIP, narrow and wide SO as well as a space saving TSSOP package. The ADM3222 is available in 18 lead DIP , SO and in 20 lead SSOP and TSSOP. The ADM1385 is available in a 20 lead SSOP package and is pin compatible with the LTC1385 CG.APPLICATIONSGeneral-purpose RS-232 data linkPortable instrumentsPrinters, palmtop computers, PDAs | 400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | 0.154 in, 3.9 mm Width | ||
400 mV | 16-TSSOP | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-TSSOP | 0.173 " | 4.4 mm | ||
400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | ||||
400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | 0.154 in, 3.9 mm Width | |||
400 mV | 16-PDIP | 3 V | 5.5 V | RS232 | Through Hole | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-DIP | 0.3 in, 7.62 mm | |||
400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | 0.154 in, 3.9 mm Width | |||
400 mV | 16-SOIC | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-SOIC | 0.154 in, 3.9 mm Width | |||
Analog Devices Inc ADM3202ARUZThe ADM3202 /ADM3222/ADM1385are high speed, 2-channel RS232/V.28 interface devices which operate from a single +3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) makes them ideal for battery powered portable instruments.The ADM3202 / ADM3222 / ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Four external 0.1 µF charge pump capacitors are used for the voltage doubler/inverter permitting operation from a single +3.3 V supply.The ADM3222 / ADM1385 contain additional enable and shutdown circuitry. TheENinput may be used to three-state the receiver outputs. TheSDinput is used to power down the charge pump and transmitter outputs reducing the quiescent current to less than 1 µA. The receivers remain enabled during shutdown unless disabled usingEN.The ADM3202 is available in a 16-lead DIP, narrow and wide SO as well as a space saving TSSOP package. The ADM3222 is available in 18 lead DIP , SO and in 20 lead SSOP and TSSOP. The ADM1385 is available in a 20 lead SSOP package and is pin compatible with the LTC1385 CG.APPLICATIONSGeneral-purpose RS-232 data linkPortable instrumentsPrinters, palmtop computers, PDAs | 400 mV | 16-TSSOP | 3 V | 5.5 V | RS232 | Surface Mount | -40 °C | 85 °C | Full | 2 | 2 | Transceiver | 460 Kbps | 16-TSSOP | 0.173 " | 4.4 mm |
Description
General part information
ADM3202 Series
The ADM3202 /ADM3222/ADM1385are high speed, 2-channel RS232/V.28 interface devices which operate from a single +3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) makes them ideal for battery powered portable instruments.The ADM3202 / ADM3222 / ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Four external 0.1 µF charge pump capacitors are used for the voltage doubler/inverter permitting operation from a single +3.3 V supply.The ADM3222 / ADM1385 contain additional enable and shutdown circuitry. TheENinput may be used to three-state the receiver outputs. TheSDinput is used to power down the charge pump and transmitter outputs reducing the quiescent current to less than 1 µA. The receivers remain enabled during shutdown unless disabled usingEN.The ADM3202 is available in a 16-lead DIP, narrow and wide SO as well as a space saving TSSOP package. The ADM3222 is available in 18 lead DIP , SO and in 20 lead SSOP and TSSOP. The ADM1385 is available in a 20 lead SSOP package and is pin compatible with the LTC1385 CG.APPLICATIONSGeneral-purpose RS-232 data linkPortable instrumentsPrinters, palmtop computers, PDAs
Documents
Technical documentation and resources