Zenode.ai Logo
Texas Instruments

Texas Instruments

Texas Instruments Incorporated (TI) is a global semiconductor design and manufacturing company that develops analog ICs and embedded processors. By employing the worlds brightest minds, TI creates innovations that shape the future of technology. TI is helping more than 100,000 customers transform the future, today.

Series List(7161)

PartCategory# PartsStatusDescription
Texas InstrumentsTPS3852Automotive, high-accuracy voltage supervisor with integrated window watchdog timer
Supervisors81
The TPS3852-Q1 is a precision voltage supervisor with an integrated window watchdog timer. The TPS3852-Q1 includes a precision undervoltage supervisor with an undervoltage threshold (VITN) that achieves 0.8% accuracy over the specified temperature range of –40°C to +125°C. In addition, the TPS3852-Q1 includes accurate hysteresis making the device ideal for... Read More
Texas InstrumentsTPS386040Push-pull, quad-supply voltage supervisors with programmable delay & watchdog timer
Supervisors31
The TPS3860x0 family of supply voltage supervisors (SVSs) can monitor four power rails that are greater than 0.4 V and one power rail less than 0.4 V (including negative voltage) with a 0.25% (typical) threshold accuracy. Each of the four supervisory circuits (SVS-n) assert aRESETnor RESETn output signal when the... Read More
Texas InstrumentsTPS3870Automotive high-accuracy overvoltage reset IC with time delay and manual reset
Supervisors21
The TPS3870-Q1 device is an integrated overvoltage (OV) monitor or reset IC in industry’s smallest 6-pin DSE package. This highly accurate voltage supervisor is ideal for systems that operate on low-voltage supply rails and have narrow margin supply tolerances. Low threshold hysteresis prevent false reset signals when the monitored voltage... Read More
Texas InstrumentsTPS389001Automotive low-quiescent current 1% accuracy supervisor with programmable delay
Supervisors31
The TPS3890-Q1 is a precision voltage supervisor with low-quiescent current that monitors system voltages as low as 1.15 V, asserting an open-drainRESETsignal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. TheRESEToutput remains low for the user-adjustable delay... Read More
Texas InstrumentsTPS389012Automotive low-quiescent current 1% accuracy supervisor with programmable delay
Supervisors21
The TPS3890-Q1 is a precision voltage supervisor with low-quiescent current that monitors system voltages as low as 1.15 V, asserting an open-drainRESETsignal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. TheRESEToutput remains low for the user-adjustable delay... Read More
Texas InstrumentsTPS389025Automotive low-quiescent current 1% accuracy supervisor with programmable delay
Supervisors31
The TPS3890-Q1 is a precision voltage supervisor with low-quiescent current that monitors system voltages as low as 1.15 V, asserting an open-drainRESETsignal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. TheRESEToutput remains low for the user-adjustable delay... Read More
Texas InstrumentsTPS3895Single-channel, ultra-small, adjustable supervisor with active-high, push-pull output
Supervisors41
The TPS3895, TPS3896, TPS3897, and TPS3898 devices (TPS389x) are a family of very small supervisory circuits that monitor voltages greater than 500 mV with a 0.25% (typical) threshold accuracy and offer adjustable delay time using external capacitors. The TPS389x family also has a logic enable pin (ENABLE orENABLE) to power... Read More
Texas InstrumentsTPS536594+1/3+2 Dual-Channel VR13 D-CAP+™ Step-Down Multiphase Controller With NVM and PMBus
Special Purpose Regulators21
The TPS53659 is a fully VR13 SVID compliant step-down controller with dual channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET™ power stage. Advanced control features such as D-CAP+™ architecture with undershoot reduction (USR) provide fast transient response, low output capacitance, and good current... Read More
Texas InstrumentsTPS3896Single-channel, ultra-small, adjustable supervisor with active-low, push-pull output
Supervisors41
The TPS3895, TPS3896, TPS3897, and TPS3898 devices (TPS389x) are a family of very small supervisory circuits that monitor voltages greater than 500 mV with a 0.25% (typical) threshold accuracy and offer adjustable delay time using external capacitors. The TPS389x family also has a logic enable pin (ENABLE orENABLE) to power... Read More
Texas InstrumentsTPS3897Single-channel, ultra-small, adjustable supervisor with active-high, open-drain output
Supervisors51
The TPS3895, TPS3896, TPS3897, and TPS3898 devices (TPS389x) are a family of very small supervisory circuits that monitor voltages greater than 500 mV with a 0.25% (typical) threshold accuracy and offer adjustable delay time using external capacitors. The TPS389x family also has a logic enable pin (ENABLE orENABLE) to power... Read More
Texas InstrumentsTPS3899Nanopower supervisor with programmable sense and reset delay
Supervisors171
The TPS3899 is a nano power, precision voltage supervisor with ±0.5% threshold accuracy and programmable sense and reset time delay in a 6 pin space saving 1.5mm x 1.5mm WSON package. The TPS3899 is a feature-rich voltage supervisor that offers the smallest total solution size in its class. Built-in hysteresis... Read More
Texas InstrumentsTPS400012.25 to 5.5V input, 300kHz, synchronous buck controller with Predictive Gate Drive™ Technology
Power Management (PMIC)21
The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on... Read More
Texas InstrumentsTPS53689Dual-channel, 8 phase step-down, digital multiphase D-CAP+™ controller with VR14 SVID and PMBus
Special Purpose Regulators21
The TPS53689 is a VR14 SVID compliant step down controller with two channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET™ power stages. Advanced control features such as the D-CAP+ architecture with undershoot reduction (USR) and overshoot reduction (OSR) provide fast transient response, low... Read More
Texas InstrumentsTPS40002Low Input (2.25V-5.5V) 600 kHz Frequency, Synchronous Buck Controller, Source Only
Power Management (PMIC)36
The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on... Read More
Texas InstrumentsTPS400032.25 to 5.5V input, 600kHz, synchronous buck controller with Predictive Gate Drive™ Technology
Power Management (PMIC)44
The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on... Read More
Texas InstrumentsTPS400072.25V-5.5V, 300 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation
Power Management (PMIC)61
The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on... Read More
Texas InstrumentsTPS40020Enhanced Low Input (2.25V-5.5V) up to 1MHz Frequency, Sync. Buck Controller, source only
Power Management (PMIC)31
The TPS4002x family of dc-to-dc controllers are designed for non-isolated synchronous buck regulators, providing enhanced operation and design flexability through user programmability. The TPS4002x utilizes a proprietary Predictive Gate Drive™ technology to minimize the diode conduction losses associated with the high-side and synchronous rectifier N-channel MOSFET transistions. The integrated charge... Read More
Texas InstrumentsTPS40050Wide Input Voltage Synchronous Buck Controller
Power Management (PMIC)31
The TPS4005x is a family of high-voltage, wide input (8 V to 40 V), synchronous, step-down converters. The TPS4005x family offers design flexibility with a variety of user programmable functions, including soft-start, UVLO, operating frequency, voltage feed-forward, high-side current limit, and loop compensation. The TPS4005x are also synchronizable to an... Read More
Texas InstrumentsTPS40052Wide Input (8V-40V) up to 1MHz Frequency, Synchronous Buck Controller, with DDR tracking
Power Management (PMIC)41
The TPS40052 is part of a family of high-voltage, wide input, synchronous, step-down converters. The TPS40052 offers design flexibility with a variety of user programmable functions, including soft-start, operating frequency, high-side current limit, and loop compensation. The TPS40052 is also synchronizable to an external supply. It incorporates MOSFET gate drivers... Read More
Texas InstrumentsTPS40054Wide Input (8V-40V) up to 1MHz Frequency Synchronous Buck Controller, source only
Power Management (PMIC)44
The TPS4005x is a family of high-voltage, wide-input (8 V to 40 V), synchronous, step-down controllers. The TPS4005x family offers design flexibility with a variety of user-programmable functions, including soft start, UVLO, operating frequency, voltage feedforward, high-side current limit, and loop compensation. The TPS4005x uses voltage feedforward control techniques to... Read More