Texas Instruments

High Speed CMOS Logic Quad-Bus Transceiver with 3-State Outputs

6-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

High Speed CMOS Logic Non-Inverting Octal-Bus Transceiver with 3-State Outpus

High Speed CMOS Logic 8-Input Multiplexer, 3-State

The CD74HC253 and CD74HCT253 are dual 4-to-1 line selector/multiplexers having three-state outputs. One of four sources for each section is selected by the common select inputs, S0 and S1. When the output enable (1OE\, 2OE\) is HIGH, the output is in the high-impedance state. The CD74HC253 and CD74HCT253 are dual... Read More

The ’HC257 and ’HCT257 are quad 2-input multiplexers which select four bits of data from two sources under the control of a common Select Input (S). The Output Enable input (OE\) is active LOW. When OE\ is HIGH, all of the outputs (1Y-4Y) are in the high impedance state regardless... Read More

These devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (G)\ input is at a high logic level. To ensure the high-impedance state during power up or power down, G\... Read More

High Speed CMOS Logic 8-Bit Addressable Latch

This device contains three independent 3-input NOR gates. Each gate performs the Boolean function Y =A + B + Cin positive logic. This device contains three independent 3-input NOR gates. Each gate performs the Boolean function Y =A + B + Cin positive logic.

High Speed CMOS Logic Octal D-Type Flip-Flop with Reset

The ’HC280 and ’HCT280 are 9-bit odd/even parity, generator checker devices. Both even and odd parity outputs are available for checking or generating parity for words up to nine bits long. Even parity is indicated (E output to any input of an additional HC/HCT280 parity checker. The ’HC280 and ’HCT280... Read More

High Speed CMOS Logic 4-Bit Binary Full Adder with Fast Carry

The ’HC259 and ’HCT299 are 8-bit shift/storage registers with three-state bus interface capability. The register has four synchronous-operating modes controlled by the two select inputs as shown in the mode select (S0, S1) table. The mode select, the serial data (DS0, DS7) and the parallel data (I/O0– I/O7) respond only... Read More

This device contains one independent 8-input NAND gate. Each gate performs the Boolean function Y =A ● B ● C ● D ● E ● F ● G ● Hin positive logic. This device contains one independent 8-input NAND gate. Each gate performs the Boolean function Y =A ● B... Read More

This device contains four independent 2-input OR gates. Each gate performs the Boolean function Y = A + B in positive logic. This device contains four independent 2-input OR gates. Each gate performs the Boolean function Y = A + B in positive logic.

The CD54HC354, CD74HC354, and CD74HCT354 are data selectors/multiplexers that select one of eight sources. In both types, the data select bits S0, S1 and S2 are stored in transparent latches that are enabled by a low latch enable input, LE\. In the HC/HCT354 the data enable input, E\, controls transparent... Read More

6-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

6-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

6-ch, 4.5-V to 5.5-V inverters with TTL-compatible CMOS inputs and 3-state outputs

High Speed CMOS Logic Octal Transparent Latches with 3-State Outputs