Beta

⌘K

A

Analog Devices

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(7780)

...

Part	Reset Timeout [Min]	Reset	Supplier Device Package	Voltage - Threshold	Operating Temperature [Min]	Operating Temperature [Max]	Number of Voltages Monitored	Package / Case	Output	Type	Mounting Type	Current - Supply	Voltage - Supply	RF Type	Frequency [Min]	Frequency [Max]	Test Frequency	Output Configuration	Synchronous Rectifier	Frequency - Switching	Package / Case	Package / Case	Voltage - Output (Max) [Max]	Output Type	Number of Outputs	Voltage - Output (Min/Fixed)	Voltage - Input (Max) [Max]	Voltage - Input (Min) [Min]	Function	Number of D/A Converters	Settling Time	Differential Output	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Reference Type	Number of Bits	INL/DNL (LSB)	Data Interface	Ratio - S/H:ADC	Number of A/D Converters	Architecture	Input Type	Package / Case	Configuration	Number of Inputs	Sampling Rate (Per Second)	Voltage - Supply [Min]	Voltage - Supply [Max]	Interface	Topology	Protection Features	Current - Supply (Max) [Max]	Current - Quiescent (Iq)	PSRR [Max]	PSRR [Min]	Current - Output	Number of Regulators	Voltage Dropout (Max) [Max]	Control Features	Number of Bits [custom]
Analog Devices ADM6713RAKSZ-REEL	140 ms	Active Low	SC-70-4	2.63 V	-40 °C	125 °C	1	SC-82A SOT-343	Open Drain or Open Collector	Simple Reset/Power-On Reset	Surface Mount
Analog Devices HMC913-SX			Die					Die			Surface Mount	80 mA	3.3 V	General Purpose	600 MHz	20 GHz	600 MHz
Analog Devices LTC1550LCGN#PBF			16-SSOP		0 °C	70 °C		16-SSOP			Surface Mount							Negative		900 kHz	0.154 in	3.9 mm	-4.8 V	Adjustable	1	-1.225 V	5.5 V	2.7 V	Step-Up/Step-Down
Analog Devices LTC2664CUH-16#TRPBF			32-QFN (5x5)		0 °C	70 °C					Surface Mount													Voltage - Buffered						4	20 µs		1.71 V	5.5 V	-4.5 V	15.75 V	External Internal	16	0.35 LSB 2.2 LSB	SPI
Analog Devices LTC2356CMSE-14#TRPBF			10-MSOP-EP		0 °C	70 °C		10-MSOP 10-TFSOP Exposed Pad			Surface Mount																						3.1 V	3.6 V	3.1 V	3.6 V	External Internal	14		SPI	1:1	1	SAR	Differential Single Ended	0.118 in 3 Lead	S/H-ADC	1	3.5 M
Analog Devices LTC6820IMS#TRPBF			16-MSOP					16-TFSOP			Surface Mount																																						2.7 V	5.5 V	SPI
Analog Devices LT1959CR#PBF			DDPAK-7		0 °C	125 ¯C		D2PAK (7 Leads + Tab) TO-263-8 TO-263CA			Surface Mount							Positive		500 kHz			12.9 V	Adjustable	1	1.21 V	15 V	4.3 V	Step-Down																							Buck SEPIC
Analog Devices ADP171AUJZ-R7					-40 °C	125 °C		SOT-23-5 Thin TSOT-23-5			Surface Mount							Positive					3 V	Adjustable		0.8 V	3.6 V																										Over Current Over Temperature Under Voltage Lockout (UVLO)	260 µA	60 µA	73 dB	47 dB	300 mA	1	0.135 V	Enable
Analog Devices AD767KN			24-PDIP		0 °C	70 °C		24-DIP			Through Hole										0.3 in	7.62 mm		Voltage - Buffered							3 µs				-11.4 V	16.5 V	External Internal	12 bits		Parallel			Current Steering
Analog Devices LTC2634CUD-LMX10#TRPBF			16-QFN (3x3)		0 °C	70 °C		16-WFQFN Exposed Pad			Surface Mount													Voltage - Buffered						4	3.8 µs		2.7 V	5.5 V	2.7 V	5.5 V	External Internal		0.2 LSB 0.5 LSB	SPI																						10

Series	Category	# Parts	Status	Description

Analog DevicesSDP-CB1	Development Boards, Kits, Programmers	1	1
Analog DevicesSDP-INTERZ	Development Boards, Kits, Programmers	1	1
Analog DevicesSMP08Low Droop Rate Octal Sample-and-Hold with Multiplexed Input	Special Purpose Amplifiers	2	1	The SMP08 is a monolithic octal sample-and-hold; it has eight internal buffer amplifiers, input multiplexer, and internal hold capacitors. It is manufactured in an advanced oxide isolated CMOS technology to obtain high accuracy, low droop rate, and fast acquisition time. The SMP08 has a typical linearity error of only 0.01%... Read More
Analog DevicesSMP18	Linear	2	8
Analog DevicesSOMCRR	Embedded MCU, DSP Evaluation Boards	1	1
Analog DevicesSSM2018	Linear	1	8
Analog DevicesSSM2160	Audio Special Purpose	1	8
Analog DevicesSSM2166Complete Microphone Conditioner with Variable Compression & Noise Gating	Integrated Circuits (ICs)	1	1	The SSM2166 integrates a complete and flexible solution for conditioning microphone inputs in computer audio systems. It is also excellent for improving vocal clarity in communications and public address systems. A low noise, voltage-controlled amplifier (VCA) provides a gain that is dynamically adjusted by a control loop to maintain a... Read More
Analog DevicesSSM2167Low Voltage Microphone Preamplifier with Variable Compression & Noise Gating	Amplifiers	2	1	The SSM2167 is a complete and flexible solution for conditioning microphone inputs in personal electronics and computer audio systems. It is also excellent for improving vocal clarity in com-munications and public address systems. A low noise voltage controlled amplifier (VCA) provides a gain that is dynamically adjusted by a control... Read More
Analog DevicesSSM2211Low Distortion, 1.5 W Audio Power Amplifier	Amplifiers	1	1	The SSM2211 is a high performance audio amplifier that delivers 1 W rms of low distortion audio power into a bridge-connected 8 Ω speaker load (or 1.5 W rms into a 4 Ω load).The SSM2211 operates over a wide temperature range and is specified for single-supply voltages between 2.7 V... Read More