Beta

⌘K

A

Analog Devices

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(7780)

...

Part	Reset Timeout [Min]	Reset	Supplier Device Package	Voltage - Threshold	Operating Temperature [Min]	Operating Temperature [Max]	Number of Voltages Monitored	Package / Case	Output	Type	Mounting Type	Current - Supply	Voltage - Supply	RF Type	Frequency [Min]	Frequency [Max]	Test Frequency	Output Configuration	Synchronous Rectifier	Frequency - Switching	Package / Case	Package / Case	Voltage - Output (Max) [Max]	Output Type	Number of Outputs	Voltage - Output (Min/Fixed)	Voltage - Input (Max) [Max]	Voltage - Input (Min) [Min]	Function	Number of D/A Converters	Settling Time	Differential Output	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Reference Type	Number of Bits	INL/DNL (LSB)	Data Interface	Ratio - S/H:ADC	Number of A/D Converters	Architecture	Input Type	Package / Case	Configuration	Number of Inputs	Sampling Rate (Per Second)	Voltage - Supply [Min]	Voltage - Supply [Max]	Interface	Topology	Protection Features	Current - Supply (Max) [Max]	Current - Quiescent (Iq)	PSRR [Max]	PSRR [Min]	Current - Output	Number of Regulators	Voltage Dropout (Max) [Max]	Control Features	Number of Bits [custom]
Analog Devices ADM6713RAKSZ-REEL	140 ms	Active Low	SC-70-4	2.63 V	-40 °C	125 °C	1	SC-82A SOT-343	Open Drain or Open Collector	Simple Reset/Power-On Reset	Surface Mount
Analog Devices HMC913-SX			Die					Die			Surface Mount	80 mA	3.3 V	General Purpose	600 MHz	20 GHz	600 MHz
Analog Devices LTC1550LCGN#PBF			16-SSOP		0 °C	70 °C		16-SSOP			Surface Mount							Negative		900 kHz	0.154 in	3.9 mm	-4.8 V	Adjustable	1	-1.225 V	5.5 V	2.7 V	Step-Up/Step-Down
Analog Devices LTC2664CUH-16#TRPBF			32-QFN (5x5)		0 °C	70 °C					Surface Mount													Voltage - Buffered						4	20 µs		1.71 V	5.5 V	-4.5 V	15.75 V	External Internal	16	0.35 LSB 2.2 LSB	SPI
Analog Devices LTC2356CMSE-14#TRPBF			10-MSOP-EP		0 °C	70 °C		10-MSOP 10-TFSOP Exposed Pad			Surface Mount																						3.1 V	3.6 V	3.1 V	3.6 V	External Internal	14		SPI	1:1	1	SAR	Differential Single Ended	0.118 in 3 Lead	S/H-ADC	1	3.5 M
Analog Devices LTC6820IMS#TRPBF			16-MSOP					16-TFSOP			Surface Mount																																						2.7 V	5.5 V	SPI
Analog Devices LT1959CR#PBF			DDPAK-7		0 °C	125 ¯C		D2PAK (7 Leads + Tab) TO-263-8 TO-263CA			Surface Mount							Positive		500 kHz			12.9 V	Adjustable	1	1.21 V	15 V	4.3 V	Step-Down																							Buck SEPIC
Analog Devices ADP171AUJZ-R7					-40 °C	125 °C		SOT-23-5 Thin TSOT-23-5			Surface Mount							Positive					3 V	Adjustable		0.8 V	3.6 V																										Over Current Over Temperature Under Voltage Lockout (UVLO)	260 µA	60 µA	73 dB	47 dB	300 mA	1	0.135 V	Enable
Analog Devices AD767KN			24-PDIP		0 °C	70 °C		24-DIP			Through Hole										0.3 in	7.62 mm		Voltage - Buffered							3 µs				-11.4 V	16.5 V	External Internal	12 bits		Parallel			Current Steering
Analog Devices LTC2634CUD-LMX10#TRPBF			16-QFN (3x3)		0 °C	70 °C		16-WFQFN Exposed Pad			Surface Mount													Voltage - Buffered						4	3.8 µs		2.7 V	5.5 V	2.7 V	5.5 V	External Internal		0.2 LSB 0.5 LSB	SPI																						10

Series	Category	# Parts	Status	Description

Analog DevicesLTC4251BNegative Voltage Hot Swap Controllers in SOT-23	PMIC	8	1	The LTC4251B/LTC4251B-1/LTC4251B-2 negative voltage Hot Swap™controllers allow a board to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current limiting: a timed circuit breaker, active current limiting and a fast feedforward path that limits peak current under worst-case catastrophic fault conditions.Programmable... Read More
Analog DevicesLTC4252BLTC4252CNegative Voltage Hot Swap Controllers	PMIC	24	1	The LTC4252 negative voltage Hot Swap™controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current limiting: a timed circuit breaker, active current limiting and a fast feedforward path that limits peak current under worst-case catastrophic fault conditions.Adjustable... Read More
Analog DevicesLTC4253LTC4253A–48V Hot Swap Controller with Sequencer	Integrated Circuits (ICs)	4	1	The LTC4253/LTC4253A negative voltage Hot Swap™controllers allow a board to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current-limiting: a timed circuit breaker, active current limiting and a fast feedforward path that limits peak current under worst-case catastrophic fault conditions. The... Read More
Analog DevicesLTC4257-1IEEE 802.3af PD Power over Ethernet Interface Controller with Dual Current Limit	PMIC	10	1	The LTC4257-1 provides complete signature and power interface functions for a device operating in an IEEE 802.3af Power over Ethernet (PoE) system. The LTC4257-1 simplifies Powered Device (PD) design by incorporating the 25k signature resistor, classification current source, input current limit, undervoltage lockout, thermal overload protection, signature disable and power... Read More
Analog DevicesLTC4258Quad IEEE 802.3af Power over Ethernet Controller with Integrated Detection	Integrated Circuits (ICs)	1	1	The LTC4258 is a quad –48V Hot Swap™controller designed for use in IEEE 802.3af compliant Power Sourcing Equipment (PSE). It consists of four independent ports, each with output current limit, short-circuit protection, complete Powered Device (PD) detection and classification capability, and programmable PD disconnect using DC sensing. Used with power... Read More
Analog DevicesLTC4259A-1Quad IEEE 802.3af Power over Ethernet Controller with AC Disconnect	Power Management (PMIC)	1	1	The LTC4259A-1 is a quad –48V Hot Swap™controller designed for use in IEEE 802.3af compliant Power Sourcing Equipment (PSE). It consists of four independent ports, each with output current limit, short-circuit protection, complete Powered Device (PD) detection and classification capability, and programmable PD disconnect using AC or DC sensing. Used... Read More
Analog DevicesLTC4260Positive High Voltage Hot Swap Controller with I2C Compatible Monitoring	Power Management (PMIC)	3	1	The LTC4260 Hot Swap™controller allows a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, the board supply voltage can be ramped up at an adjustable rate. An I2C interface and onboard ADC allow monitoring of board current, voltage and fault status.The... Read More
Analog DevicesLTC4261Negative Voltage Hot Swap Controllers with ADC and I²C Monitoring	PMIC	9	1	The LTC4261/LTC4261-2 negative voltage Hot Swap™controllers allow a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, the board supply voltage can be ramped at an adjustable rate. The devices feature independently adjustable inrush current and overcurrent limits to minimize stresses on... Read More
Analog DevicesLTC4263-1Single IEEE 802.3af Compliant PSE Controller with Internal Switch	Power Management (PMIC)	5	1	The LTC4263 is an autonomous single-channel PSE controller for use in IEEE 802.3af compliant Power over Ethernet systems. It includes an on-board power MOSFET, internal inrush, current limit, and short-circuit control, IEEE 802.3af compliant PD detection and classification circuitry, and selectable AC or DC disconnect sensing. On-board control algorithms provide... Read More
Analog DevicesLTC4264High Power PD Interface Controller with 750mA Current Limit	Power Management (PMIC)	4	1	The LTC4264 is an integrated Powered Device (PD) interface controller intended for IEEE 802.3af Power over Ethernet (PoE) and high power PoE applications up to 35W. By including a precision dual current limit, the LTC4264 keeps inrush below the IEEE802.3af current limit levels to ensure interoperability success while allowing for... Read More