A
Analog Devices
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Reset Timeout [Min] | Reset | Supplier Device Package | Voltage - Threshold | Operating Temperature [Min] | Operating Temperature [Max] | Number of Voltages Monitored | Package / Case | Output | Type | Mounting Type | Current - Supply | Voltage - Supply | RF Type | Frequency [Min] | Frequency [Max] | Test Frequency | Output Configuration | Synchronous Rectifier | Frequency - Switching | Package / Case | Package / Case | Voltage - Output (Max) [Max] | Output Type | Number of Outputs | Voltage - Output (Min/Fixed) | Voltage - Input (Max) [Max] | Voltage - Input (Min) [Min] | Function | Number of D/A Converters | Settling Time | Differential Output | Voltage - Supply, Digital [Min] | Voltage - Supply, Digital [Max] | Voltage - Supply, Analog [Min] | Voltage - Supply, Analog [Max] | Reference Type | Number of Bits | INL/DNL (LSB) | Data Interface | Ratio - S/H:ADC | Number of A/D Converters | Architecture | Input Type | Package / Case | Configuration | Number of Inputs | Sampling Rate (Per Second) | Voltage - Supply [Min] | Voltage - Supply [Max] | Interface | Topology | Protection Features | Current - Supply (Max) [Max] | Current - Quiescent (Iq) | PSRR [Max] | PSRR [Min] | Current - Output | Number of Regulators | Voltage Dropout (Max) [Max] | Control Features | Number of Bits [custom] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | 140 ms | Active Low | SC-70-4 | 2.63 V | -40 °C | 125 °C | 1 | SC-82A SOT-343 | Open Drain or Open Collector | Simple Reset/Power-On Reset | Surface Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | Die | Die | Surface Mount | 80 mA | 3.3 V | General Purpose | 600 MHz | 20 GHz | 600 MHz | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-SSOP | 0 °C | 70 °C | 16-SSOP | Surface Mount | Negative | 900 kHz | 0.154 in | 3.9 mm | -4.8 V | Adjustable | 1 | -1.225 V | 5.5 V | 2.7 V | Step-Up/Step-Down | ||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 32-QFN (5x5) | 0 °C | 70 °C | Surface Mount | Voltage - Buffered | 4 | 20 µs | 1.71 V | 5.5 V | -4.5 V | 15.75 V | External Internal | 16 | 0.35 LSB 2.2 LSB | SPI | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 10-MSOP-EP | 0 °C | 70 °C | 10-MSOP 10-TFSOP Exposed Pad | Surface Mount | 3.1 V | 3.6 V | 3.1 V | 3.6 V | External Internal | 14 | SPI | 1:1 | 1 | SAR | Differential Single Ended | 0.118 in 3 Lead | S/H-ADC | 1 | 3.5 M | ||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-MSOP | 16-TFSOP | Surface Mount | 2.7 V | 5.5 V | SPI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | DDPAK-7 | 0 °C | 125 ¯C | D2PAK (7 Leads + Tab) TO-263-8 TO-263CA | Surface Mount | Positive | 500 kHz | 12.9 V | Adjustable | 1 | 1.21 V | 15 V | 4.3 V | Step-Down | Buck SEPIC | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | -40 °C | 125 °C | SOT-23-5 Thin TSOT-23-5 | Surface Mount | Positive | 3 V | Adjustable | 0.8 V | 3.6 V | Over Current Over Temperature Under Voltage Lockout (UVLO) | 260 µA | 60 µA | 73 dB | 47 dB | 300 mA | 1 | 0.135 V | Enable | ||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 24-PDIP | 0 °C | 70 °C | 24-DIP | Through Hole | 0.3 in | 7.62 mm | Voltage - Buffered | 3 µs | -11.4 V | 16.5 V | External Internal | 12 bits | Parallel | Current Steering | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-QFN (3x3) | 0 °C | 70 °C | 16-WFQFN Exposed Pad | Surface Mount | Voltage - Buffered | 4 | 3.8 µs | 2.7 V | 5.5 V | 2.7 V | 5.5 V | External Internal | 0.2 LSB 0.5 LSB | SPI | 10 |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
Analog DevicesLT8698SLT8698S-15V 3A Output, 42V Input USB Charger with Cable Drop Compensation and Dataline Protection | Power Management - Specialized | 6 | 1 | The LT8698S is a compact, high efficiency, synchronous monolithic step-down switching regulator designed to power the 5V USB VBUSrail with up to 3A from an input voltage as high as 42V. Programmable cable drop compensation maintains accurate 5V VBUSregulation even for USB sockets separated from the LT8698S by a long... Read More |
| PMIC | 13 | 1 | The LT8705A is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage. The part has integrated input current, input voltage, output current and output voltage feedback loops. With a wide 2.8V to 80V input and 1.3V to 80V output... Read More | |
Analog DevicesLT8708-180V Synchronous 4-Switch Buck-Boost DC/DC Slave Controller for LT8708 Multiphase System | PMIC | 7 | 1 | The LT8708 is a high performance buck-boost switching regulator controller that operates from an input voltage that can be above, below or equal to the output voltage. Features are included to simplify bidirectional power conversion in battery/capacitor backup systems and other applications that may need regulation of VOUT, VIN, IOUT,... Read More |
| Power Management (PMIC) | 4 | 1 | The LT8710 is a synchronous PWM DC/DC controller with a rail-to-rail output current monitor and control. The LT8710 is ideal for many types of power supply topologies and can be easily configured for boost, SEPIC, inverting, or flyback configurations.The LT8710’s rail-to-rail output current monitor and control allows the part to... Read More | |
| Integrated Circuits (ICs) | 5 | 1 | The LT8711 is a multi-topology current mode PWM controller that can easily be configured as a synchronous buck, boost, SEPIC, ZETA or as a nonsynchronous buck-boost converter. Its dual gate drive voltage inputs optimize gate driver efficiency.The 15µA no-load quiescent current with the output voltage in regulation extends operating run-time... Read More | |
| Voltage Regulators - DC DC Switching Controllers | 1 | 1 | The LT8714 is a synchronous PWM DC/DC controller designed for a four quadrant output converter. The output voltage cleanly transitions through zero volts with sourcing and sinking output current capability.The LT8714 is ideal for regulating to positive, negative, or zero volts when configured for the novel four quadrant topology. Applications... Read More | |
| Current Regulation/Management | 1 | 1 | The LT9890 is a high-precision current monitor with an internal current-sense element supporting up to 150 A of load current. Factory calibration of the current-sense element and a zero temperature coefficient architecture results in less than 1.3% total unadjusted error (TUE). A 26,600:1 input-to-output current ratio with a response bandwidth... Read More | |
| Integrated Circuits (ICs) | 1 | 1 | The LTC1043 is a monolithic, charge-balanced, dual switched capacitor instrumentation building block. A pair of switches alternately connects an external capacitor to an input voltage and then connects the charged capacitor across an output port. The internal switches have a break-before-make action. An internal clock is provided and its frequency... Read More | |
| Power Management (PMIC) | 3 | 1 | The LTC1044A is a monolithic CMOS switched-capacitor voltage converter. It plugs in for ICL7660/LTC1044 in applications where higher input voltage (up to 12V) is needed. The LTC1044A provides several conversion functions without using inductors. The input voltage can be inverted (VOUT= –VIN), doubled (VOUT= 2VIN), divided (VOUT= VIN/2) or multiplied... Read More | |
| Translators, Level Shifters | 2 | 1 | The LTC1045 is a hex level translator manufactured using an enhanced LTCMOS™silicon gate process. It consists of six high speed comparators with output latches and three-state capability. Each comparator’s plus input is brought out separately. The minus inputs of comparators 1 to 4 are tied to VTRIP1while 5 and 6... Read More | |