Beta

⌘K

A

Analog Devices

Series	Category	# Parts	Status	Description

Part	Spec A	Spec B	Spec C	Spec D	Description

Standalone parts(7780)

...

Part	Reset Timeout [Min]	Reset	Supplier Device Package	Voltage - Threshold	Operating Temperature [Min]	Operating Temperature [Max]	Number of Voltages Monitored	Package / Case	Output	Type	Mounting Type	Current - Supply	Voltage - Supply	RF Type	Frequency [Min]	Frequency [Max]	Test Frequency	Output Configuration	Synchronous Rectifier	Frequency - Switching	Package / Case	Package / Case	Voltage - Output (Max) [Max]	Output Type	Number of Outputs	Voltage - Output (Min/Fixed)	Voltage - Input (Max) [Max]	Voltage - Input (Min) [Min]	Function	Number of D/A Converters	Settling Time	Differential Output	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Reference Type	Number of Bits	INL/DNL (LSB)	Data Interface	Ratio - S/H:ADC	Number of A/D Converters	Architecture	Input Type	Package / Case	Configuration	Number of Inputs	Sampling Rate (Per Second)	Voltage - Supply [Min]	Voltage - Supply [Max]	Interface	Topology	Protection Features	Current - Supply (Max) [Max]	Current - Quiescent (Iq)	PSRR [Max]	PSRR [Min]	Current - Output	Number of Regulators	Voltage Dropout (Max) [Max]	Control Features	Number of Bits [custom]
Analog Devices ADM6713RAKSZ-REEL	140 ms	Active Low	SC-70-4	2.63 V	-40 °C	125 °C	1	SC-82A SOT-343	Open Drain or Open Collector	Simple Reset/Power-On Reset	Surface Mount
Analog Devices HMC913-SX			Die					Die			Surface Mount	80 mA	3.3 V	General Purpose	600 MHz	20 GHz	600 MHz
Analog Devices LTC1550LCGN#PBF			16-SSOP		0 °C	70 °C		16-SSOP			Surface Mount							Negative		900 kHz	0.154 in	3.9 mm	-4.8 V	Adjustable	1	-1.225 V	5.5 V	2.7 V	Step-Up/Step-Down
Analog Devices LTC2664CUH-16#TRPBF			32-QFN (5x5)		0 °C	70 °C					Surface Mount													Voltage - Buffered						4	20 µs		1.71 V	5.5 V	-4.5 V	15.75 V	External Internal	16	0.35 LSB 2.2 LSB	SPI
Analog Devices LTC2356CMSE-14#TRPBF			10-MSOP-EP		0 °C	70 °C		10-MSOP 10-TFSOP Exposed Pad			Surface Mount																						3.1 V	3.6 V	3.1 V	3.6 V	External Internal	14		SPI	1:1	1	SAR	Differential Single Ended	0.118 in 3 Lead	S/H-ADC	1	3.5 M
Analog Devices LTC6820IMS#TRPBF			16-MSOP					16-TFSOP			Surface Mount																																						2.7 V	5.5 V	SPI
Analog Devices LT1959CR#PBF			DDPAK-7		0 °C	125 ¯C		D2PAK (7 Leads + Tab) TO-263-8 TO-263CA			Surface Mount							Positive		500 kHz			12.9 V	Adjustable	1	1.21 V	15 V	4.3 V	Step-Down																							Buck SEPIC
Analog Devices ADP171AUJZ-R7					-40 °C	125 °C		SOT-23-5 Thin TSOT-23-5			Surface Mount							Positive					3 V	Adjustable		0.8 V	3.6 V																										Over Current Over Temperature Under Voltage Lockout (UVLO)	260 µA	60 µA	73 dB	47 dB	300 mA	1	0.135 V	Enable
Analog Devices AD767KN			24-PDIP		0 °C	70 °C		24-DIP			Through Hole										0.3 in	7.62 mm		Voltage - Buffered							3 µs				-11.4 V	16.5 V	External Internal	12 bits		Parallel			Current Steering
Analog Devices LTC2634CUD-LMX10#TRPBF			16-QFN (3x3)		0 °C	70 °C		16-WFQFN Exposed Pad			Surface Mount													Voltage - Buffered						4	3.8 µs		2.7 V	5.5 V	2.7 V	5.5 V	External Internal		0.2 LSB 0.5 LSB	SPI																						10

Series	Category	# Parts	Status	Description

Analog DevicesLT8495SEPIC/Boost Converter with 2A, 70V Switch, 9μA Quiescent Current, POR and Watchdog Timer	Power Management (PMIC)	4	1	The LT8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE andRSTINare low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation... Read More
Analog DevicesLT850048-Channel LED PWM Generator with 12-Bit Resolution and 50MHz Cascadable Serial Interface	PMIC	5	1	The LT8500 is a pulse width modulation (PWM) generator with 48 independent channels. Each channel has an individually adjustable 12-bit (4096-step) PWM register and a 6-bit (64-step) ±50% correction register. All controls are programmable via a simple serial data interface. Three banks of 16-channels each can be configured such that... Read More
Analog DevicesLT85504-Phase DC/DC Expander with Internal Gate Drivers for Buck Converters	Power Management (PMIC)	2	1	The LT8550 is a multiphase expander for synchronous buck DC/DC converters. It operates in tandem with any buck DC/DC converter to increase the load current capability by adding additional phases, which are clocked outof-phase to reduce ripple current and filtering capacitance. It easily adds phases without the need to route... Read More
Analog DevicesLT8551Multiphase Boost Converter Expander with Internal Gate Drivers	PMIC	2	1	The LT8551 is a multiphase expander for synchronous boost DC/DC converters. It operates in tandem with any synchronous boost DC/DC converter to increase the load current capability by adding additional phases, which are clocked out-of-phase to reduce ripple current and filtering capacitance. It easily adds phases without the need to... Read More
Analog DevicesLT8570Boost/SEPIC/Inverting DC/DC Converter with 65V Switch, Soft-Start and Synchronization	PMIC	8	1	The LT8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter.The LT8570/LT8570-1 have an adjustable oscillator, set by a resistor from... Read More
Analog DevicesLT8580Boost/SEPIC/Inverting DC/DC Converter with 1A, 65V Switch, Soft-Start and Synchronization	Power Management (PMIC)	6	1	The LT8580 is a PWM DC/DC converter containing an internal 1A, 65V switch. The LT8580 can be configured as either a boost, SEPIC or inverting converter.The LT8580 has an adjustable oscillator, set by a resistor from the RT pin to ground. Additionally, the LT8580 can be synchronized to an external... Read More
Analog DevicesLT8582Dual 3A Boost/Inverting/SEPIC DC/DC Converter with Fault Protection	Power Management (PMIC)	2	1	The LT8582 is a dual independent channel PWM DC/DC converter with a power good pin and built-in fault protection to help guard against input overvoltage and overtemperature conditions. Each channel consists of a 42V master switch and a 42V slave switch that can be tied together for a total current... Read More
Analog DevicesLT85842.5A Monolithic Active Cell Balancer with Telemetry Interface	PMIC	2	1	The LT8584 is a monolithic flyback DC/DC converter designed to actively balance high voltage stacks of batteries. The high efficiency of a switching regulator significantly increases the achievable balancing current while reducing heat generation. Active balancing also allows for capacity recovery in stacks of mismatched batteries, a feat unattainable with... Read More
Analog DevicesLT860142V Triple Monolithic Synchronous Step-Down Regulator	PMIC	4	1	The LT8601 is a triple channel, current mode, monolithic buck switching regulator with a programmable power-on reset. All regulators are synchronized to a single oscillator with an adjustable frequency from 250kHz to 2.2MHz. The LT8601 can be configured for micropower Burst Mode or Pulse-Skipping operation at light load. Micropower operation... Read More
Analog DevicesLT860242V Quad Monolithic Synchronous Step-Down Regulator	PMIC	3	1	The LT8602 is a quad channel, current mode, monolithic buck switching regulator with a programmable power-on reset. All regulators are synchronized to a single oscillator with an adjustable frequency from 250kHz to 2.2MHz. The LT8602 can be configured for micropower Burst Mode operation or pulse-skipping operation at light load. Micropower... Read More