A
Analog Devices
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Reset Timeout [Min] | Reset | Supplier Device Package | Voltage - Threshold | Operating Temperature [Min] | Operating Temperature [Max] | Number of Voltages Monitored | Package / Case | Output | Type | Mounting Type | Current - Supply | Voltage - Supply | RF Type | Frequency [Min] | Frequency [Max] | Test Frequency | Output Configuration | Synchronous Rectifier | Frequency - Switching | Package / Case | Package / Case | Voltage - Output (Max) [Max] | Output Type | Number of Outputs | Voltage - Output (Min/Fixed) | Voltage - Input (Max) [Max] | Voltage - Input (Min) [Min] | Function | Number of D/A Converters | Settling Time | Differential Output | Voltage - Supply, Digital [Min] | Voltage - Supply, Digital [Max] | Voltage - Supply, Analog [Min] | Voltage - Supply, Analog [Max] | Reference Type | Number of Bits | INL/DNL (LSB) | Data Interface | Ratio - S/H:ADC | Number of A/D Converters | Architecture | Input Type | Package / Case | Configuration | Number of Inputs | Sampling Rate (Per Second) | Voltage - Supply [Min] | Voltage - Supply [Max] | Interface | Topology | Protection Features | Current - Supply (Max) [Max] | Current - Quiescent (Iq) | PSRR [Max] | PSRR [Min] | Current - Output | Number of Regulators | Voltage Dropout (Max) [Max] | Control Features | Number of Bits [custom] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | 140 ms | Active Low | SC-70-4 | 2.63 V | -40 °C | 125 °C | 1 | SC-82A SOT-343 | Open Drain or Open Collector | Simple Reset/Power-On Reset | Surface Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | Die | Die | Surface Mount | 80 mA | 3.3 V | General Purpose | 600 MHz | 20 GHz | 600 MHz | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-SSOP | 0 °C | 70 °C | 16-SSOP | Surface Mount | Negative | 900 kHz | 0.154 in | 3.9 mm | -4.8 V | Adjustable | 1 | -1.225 V | 5.5 V | 2.7 V | Step-Up/Step-Down | ||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 32-QFN (5x5) | 0 °C | 70 °C | Surface Mount | Voltage - Buffered | 4 | 20 µs | 1.71 V | 5.5 V | -4.5 V | 15.75 V | External Internal | 16 | 0.35 LSB 2.2 LSB | SPI | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 10-MSOP-EP | 0 °C | 70 °C | 10-MSOP 10-TFSOP Exposed Pad | Surface Mount | 3.1 V | 3.6 V | 3.1 V | 3.6 V | External Internal | 14 | SPI | 1:1 | 1 | SAR | Differential Single Ended | 0.118 in 3 Lead | S/H-ADC | 1 | 3.5 M | ||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-MSOP | 16-TFSOP | Surface Mount | 2.7 V | 5.5 V | SPI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | DDPAK-7 | 0 °C | 125 ¯C | D2PAK (7 Leads + Tab) TO-263-8 TO-263CA | Surface Mount | Positive | 500 kHz | 12.9 V | Adjustable | 1 | 1.21 V | 15 V | 4.3 V | Step-Down | Buck SEPIC | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | -40 °C | 125 °C | SOT-23-5 Thin TSOT-23-5 | Surface Mount | Positive | 3 V | Adjustable | 0.8 V | 3.6 V | Over Current Over Temperature Under Voltage Lockout (UVLO) | 260 µA | 60 µA | 73 dB | 47 dB | 300 mA | 1 | 0.135 V | Enable | ||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 24-PDIP | 0 °C | 70 °C | 24-DIP | Through Hole | 0.3 in | 7.62 mm | Voltage - Buffered | 3 µs | -11.4 V | 16.5 V | External Internal | 12 bits | Parallel | Current Steering | |||||||||||||||||||||||||||||||||||||||||||||||
Analog Devices | 16-QFN (3x3) | 0 °C | 70 °C | 16-WFQFN Exposed Pad | Surface Mount | Voltage - Buffered | 4 | 3.8 µs | 2.7 V | 5.5 V | 2.7 V | 5.5 V | External Internal | 0.2 LSB 0.5 LSB | SPI | 10 |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Power Management (PMIC) | 4 | 1 | The LT3992 is a dual current mode PWM step-down DC/DC converter with two internal 4.6A switches. Independent input voltage, shutdown, feedback, soft-start, UVLO current limit and comparator pins for each channel simplify complex power supply tracking and sequencing requirements.To optimize efficiency and component size, both converters have a programmable maximum... Read More | |
| Power Management (PMIC) | 3 | 1 | The LT3995 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 60V. Low quiescent current design consumes only 2.7μA of supply current while regulating with no load. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping the... Read More | |
| PMIC | 3 | 1 | The LT3999 is a monolithic, high voltage, high frequency DC/DC transformer driver providing isolated power in a small solution footprint.The LT3999 has two 1A current limited power switches that switch out of phase. The duty cycle is programmable to adjust the output voltage. The switching frequency is programmed up to... Read More | |
| PMIC | 3 | 1 | The LT4180 solves the problem of providing tight load regulation over long, highly resistive cables without requiring an additional pair of remote sense wires. This Virtual Remote Sense™device continuously interrogates the line impedance and corrects the power supply output voltage via its feedback loop to maintain a steady voltage at... Read More | |
| Integrated Circuits (ICs) | 1 | 1 | The LT4200 is an integrated solution for hot swap applications that allows a board to be safely inserted and removed from a live backplane. The part integrates a hot swap controller, power MOSFET and current sense resistor into a single package for small form-factor applications. The MOSFET safe operating area... Read More | |
| Hot Swap Controllers | 1 | 1 | The LT4220 16-pin dual voltage Hot Swap controller allows a board to be safely inserted and removed from a live backplane. The device operates with any combination of 2.7V to 16.5V and –2.7V to –16.5V supplies. Using two external N-channel pass transistors, the board supply voltages can be ramped up... Read More | |
| Power Management (PMIC) | 1 | 1 | The LT4239 hot swap controller allows a board to be safely inserted and removed from a live backplane. Using external N-channel pass transistors, board supply voltage and inrush current are ramped up at a controlled rate. Dual 12V gate drive supports high current loads by providing a two-stage start-up that... Read More | |
| PMIC | 5 | 1 | The LT4250L/LT4250H are 8-pin, negative 48V Hot Swap™controllers that allow a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass transistor. The pass transistor is turned off if the input... Read More | |
| Power Management (PMIC) | 2 | 1 | The LT4254 is a high voltage Hot Swap™controller that allows a board to be safely inserted and removed from a live backplane. An internal driver controls the high side N-channel MOSFET gate for supply voltages ranging from 10.8V to 36V. The part features an open-circuit detect (OPEN) output that indicates... Read More | |
| Evaluation Boards | 6 | 1 | The LT4256-3 is a high voltage Hot Swap™controller that allows a board to be safely inserted and removed from a live backplane. An internal driver controls the high side N-channel MOSFET gate for supply voltages ranging from 10.8V to 80V. The part features an open-circuit detect (OPEN) output that indicates... Read More | |