LTC2293 Series

Dual 12-Bit, 65Msps Low Power 3V ADCs

Catalog

Dual 12-Bit, 65Msps Low Power 3V ADCs

Part	Sampling Rate (Per Second)	Package / Case	Number of Inputs	Voltage - Supply, Digital [Max]	Voltage - Supply, Digital [Min]	Reference Type	Number of Bits	Operating Temperature [Max]	Operating Temperature [Min]	Features	Ratio - S/H:ADC	Voltage - Supply, Analog [Max]	Voltage - Supply, Analog [Min]	Mounting Type	Input Type	Configuration	Data Interface	Supplier Device Package	Number of A/D Converters	Architecture
Analog Devices LTC2293CUP#PBF	65 M	64-WFQFN Exposed Pad	2	3.4 V	2.7 V	External Internal	12 bits	70 °C	0 °C	Simultaneous Sampling	1:1	3.4 V	2.7 V	Surface Mount	Differential Single Ended	S/H-ADC	Parallel	64-QFN (9x9)	2	Pipelined
Analog Devices LTC2293IUP#PBF	65 M	64-WFQFN Exposed Pad	2	3.4 V	2.7 V	External Internal	12 bits	85 °C	-40 °C	Simultaneous Sampling	1:1	3.4 V	2.7 V	Surface Mount	Differential Single Ended	S/H-ADC	Parallel	64-QFN (9x9)	2	Pipelined

Catalog

Dual 12-Bit, 65Msps Low Power 3V ADCs

Key Features

• Integrated Dual 12-Bit ADCs

• Sample Rate: 65Msps/40Msps/25Msps

• Single 3V Supply (2.7V to 3.4V)

• Low Power: 400mW/235mW/150mW

• 71.3 dB SNR

• 90dB SFDR

• 110dB Channel Isolation at 100MHz

• Multiplexed or Separate Data Bus

• Flexible Input: 1VP-Pto 2VP-PRange

• 575MHz Full Power Bandwidth S/H

• Clock Duty Cycle Stabilizer

• Shutdown and Nap Modes

• Pin Compatible Family

• 105Msps: LTC2282 (12-Bit), LTC2284 (14-Bit)

• 80Msps: LTC2294 (12-Bit), LTC2299 (14-Bit)

• 65Msps: LTC2293 (12-Bit), LTC2298 (14-Bit)

• 40Msps: LTC2292 (12-Bit), LTC2297 (14-Bit)

• 25Msps: LTC2291 (12-Bit), LTC2296 (14-Bit)

• 10Msps: LTC2290 (12-Bit), LTC2295 (14-Bit)

• 64-Pin (9mm × 9mm) QFN Package

Description

The LTC2293/LTC2292/LTC2291 are 12-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2293/LTC2292/LTC2291 are perfect for demanding imaging and communications applications with AC performance that includes 71.3dB SNR and 90dB SFDR for signals at the Nyquist frequency.DC specs include ±0.3LSB INL (typ), ±0.15LSB DNL (typ) and no missing codes over temperature. The transition noise is a low 0.25LSBRMS.A single 3V supply allows low power operation. A separate output supply allows the outputs to drive 0.5V to 3.6V logic. An optional multiplexer allows both channels to share a digital output bus.A single-ended CLK input controls converter operation. An optional clock duty cycle stabilizer allows high performance at full speed for a wide range of clock duty cycles.ApplicationsWireless and Wired Broadband CommunicationImaging SystemsSpectral AnalysisPortable Instrumentation