dsPIC33FJ256GP710 Series

Catalog

MCU 16-BIT DSPIC33 DSPIC RISC 256KB FLASH 3.3V 100-PIN TQFP T/R

Part	Oscillator Type	Peripherals	Program Memory Size	Core Size	RAM Size	Core Processor	Package / Case	Connectivity	Speed	Mounting Type	Supplier Device Package	Program Memory Type	Number of I/O	Operating Temperature [Max]	Operating Temperature [Min]	Data Converters [Min]	Data Converters [Max]	Data Converters [x]
Microchip Technology DSPIC33FJ256GP710T-I/PF
Microchip Technology DSPIC33FJ256GP710T-I/PT
Microchip Technology DSPIC33FJ256GP710T-I/PF	Internal	AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT	256 KB	16-Bit	30K x 8	dsPIC	100-TQFP	CANbus, I2C, IrDA, LINbus, SPI, UART/USART	40 MIPs	Surface Mount	100-TQFP (14x14)	FLASH	85	85 °C	-40 °C	10 b	12 b	32
Microchip Technology DSPIC33FJ256GP710T-I/PT
Microchip Technology DSPIC33FJ256GP710-I/PF	Internal	AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT	256 KB	16-Bit	30K x 8	dsPIC	100-TQFP	CANbus, I2C, IrDA, LINbus, SPI, UART/USART	40 MIPs	Surface Mount	100-TQFP (14x14)	FLASH	85	85 °C	-40 °C	10 b	12 b	32
Microchip Technology DSPIC33FJ256GP710-I/PT	Internal	AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT	256 KB	16-Bit	30K x 8	dsPIC	100-TQFP	CANbus, I2C, IrDA, LINbus, SPI, UART/USART	40 MIPs	Surface Mount		FLASH	85	85 °C	-40 °C	10 b	12 b	32
Microchip Technology DSPIC33FJ256GP710-I/PT
Microchip Technology DSPIC33FJ256GP710T-I/PF
Microchip Technology DSPIC33FJ256GP710T-I/PT	Internal	AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT	256 KB	16-Bit	30K x 8	dsPIC	100-TQFP	CANbus, I2C, IrDA, LINbus, SPI, UART/USART	40 MIPs	Surface Mount		FLASH	85	85 °C	-40 °C	10 b	12 b	32

Catalog

Key Features

• Operating Range:* DC – 40 MIPS (40 MIPS @ 3.0-3.6V, -40°C to +85°C)

• * Industrial temperature range (-40°C to +85°C)

•

• High-Performance DSC CPU:* Modified Harvard architecture

• * C compiler optimized instruction set

• * 16-bit wide data path

• * 24-bit wide instructions

• * Linear program memory addressing up to 4M instruction words

• * Linear data memory addressing up to 64 Kbytes

• * 83 base instructions: mostly 1 word/1 cycle

• * Sixteen 16-bit General Purpose Registers

• * Two 40-bit accumulators:- With rounding and saturation options

• * Flexible and powerful addressing modes:- Indirect, Modulo and Bit-Reversed

• * Software stack

• * 16 x 16 fractional/integer multiply operations

• * 32/16 and 16/16 divide operations

• * Single-cycle multiply and accumulate:- Accumulator write back for DSP operations- Dual data fetch• Up to ±16-bit shifts for up to 40-bit data

•

• Direct Memory Access (DMA)* 8-channel hardware DMA

• * 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA:- Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing)

• * Most peripherals support DMA

•

• Interrupt Controller:* 5-cycle latency

• * 118 interrupt vectors

• * Up to 67 available interrupt sources

• * Up to 5 external interrupts

• * 7 programmable priority levels

• * 5 processor exceptions

•

• Digital I/O:* Wake-up/Interrupt-on-Change on up to 24 pins

• * Output pins can drive from 3.0V to 3.6V

• * All digital input pins are 5V tolerant

• * 4 mA sink on all I/O pins

•

• System Management:* Flexible clock options:- External, crystal, resonator, internal RC- Fully integrated PLL- Extremely low jitter PLL

• * Power-up Timer

• * Oscillator Start-up Timer/Stabilizer

• * Watchdog Timer with its own RC oscillator

• * Fail-Safe Clock Monitor

• * Reset by multiple sources

•

• Power Management:* On-chip 2.5V voltage regulator

• * Switch between clock sources in real time

• * Idle, Sleep and Doze modes with fast wake-up

•

• Timers/Capture/Compare/PWM:* Timer/Counters, up to nine 16-bit timers:- Can pair up to make four 32-bit timers- 1 timer runs as Real-Time Clock with external 32.768 kHz oscillator- Programmable prescaler

• * Input Capture (up to 8 channels):- Capture on up, down or both edges- 16-bit capture input functions- 4-deep FIFO on each capture

• * Output Compare (up to 8 channels):- Single or Dual 16-Bit Compare mode- 16-bit Glitchless PWM mode

•

• Communication Modules* 3-wire SPI (up to 2 modules):- Framing supports I/O interface to simple codecs- Supports 8-bit and 16-bit data- Supports all serial clock formats and sampling modes

• * I2C™ (up to 2 modules):- Full Multi-Master Slave mode support- 7-bit and 10-bit addressing- Bus collision detection and arbitration- Integrated signal conditioning- Slave address masking

• * UART (up to 2 modules):- Interrupt on address bit detect- Interrupt on UART error- Wake-up on Start bit from Sleep mode- 4-character TX and RX FIFO buffers- LIN bus support- IrDA® encoding and decoding in hardware- High-Speed Baud mode- Hardware Flow Control with CTS and RTS

• * Data Converter Interface (DCI) module:- Codec interface- Supports I2S and AC’97 protocols- Up to 16-bit data words, up to 16 words per frame- 4-word deep TX and RX buffers

• * Enhanced CAN (ECAN™ module) 2.0B active (up to 2 modules):- Up to 8 transmit and up to 32 receive buffers- 16 receive filters and 3 masks- Loopback, Listen Only and Listen All Messages modes for diagnostics and bus monitoring- Wake-up on CAN message- Automatic processing of Remote Transmission Requests- FIFO mode using DMA- DeviceNet™ addressing support

•

• Analog-to-Digital Converters (ADCs):* Up to two ADC modules in a device

• * 10-bit, 1.1 Msps or 12-bit, 500 Ksps conversion:- 2, 4 or 8 simultaneous samples- Up to 32 input channels with auto-scanning- Conversion start can be manual or synchronized with 1 of 4 trigger sources- Conversion possible in Sleep mode- ±2 LSb max integral nonlinearity- ±1 LSb max differential nonlinearity

•

• CMOS Flash Technology* Low-power, high-speed Flash technology

• * Fully static design

• * 3.3V (±10%) operating voltage

• * Industrial temperature

• * Low-power consumption

Description

dsPIC33F General Purpose Digital Signal Controller (DSC) with seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages.