EVSPIN32G06Q1S3 Series

3-phase inverter based on STSPIN32G0601Q with 3-shunt topology

Catalog

3-phase inverter based on STSPIN32G0601Q with 3-shunt topology

Part	Secondary Attributes	Primary Attributes	Type	Function	Utilized IC / Part	Embedded	Embedded	Supplied Contents
STMicroelectronics EVSPIN32G06Q1S3	On-Board LEDs Test Points	Motors (PMSM)	Power Management	Motor Controller/Driver	STSPIN32G0601	32-Bit MCU		Board(s)

Catalog

3-phase inverter based on STSPIN32G0601Q with 3-shunt topology

Key Features

• STGD6M65DF2 IGBTs power stage featuring:

- V(BR)CES= 650 V

- VCE(sat)= 1.55 V @ IC= 6 A

• Dual footprint for IGBT/MOSFET package:

- DPAK or PowerFlat 8x8 HV

• Three-shunt current sensing, suitable for:

- Sensored or sensorless three-shunt vector (FOC) algorithm

Description

The EVSPIN32G06Q1S3 board is a 3-phase complete inverter based on the STSPIN32G0601 controller, which embeds a 3‑phase 600 V gate driver and a Cortex®-M0+ STM32 MCU. The power stage features STGD6M65DF2 IGBTs, but can be populated with any IGBT or Power MOSFET in DPAK or powerFLAT 8x8 HV package. The board has a three-shunt sensing topology, and is intended for Field-Oriented Control (FOC) algorithm, in either sensored or sensorless mode. This makes it especially suited to drive permanent magnet synchronous motors (PMSMs). The evaluation board is compatible with a wide range input voltage from 35 VAC (50 VDC) to 280 VAC (400 VDC), and includes a power supply stage with the VIPER06XS in flyback configuration to generate +15 V and +3.3 V supply voltage required by the application. Debug and configuration of firmware can be performed with standard STM32 tools through the STLINK debugger. SWD and UART TX‑RX connectors are also available.