1N4739AUR-Zener-Diode Series

Zener Diode Single 2-Pin 9.1V, 5%, 5Ohm, 1000mW, DO-213AB Bag

Catalog

Zener Diode Single 2-Pin 9.1V, 5%, 5Ohm, 1000mW, DO-213AB Bag

Part	Supplier Device Package	Tolerance	Voltage - Forward (Vf) (Max) @ If	Voltage - Zener (Nom) (Vz)	Power - Max [Max]	Mounting Type	Current - Reverse Leakage @ Vr	Operating Temperature [Min]	Operating Temperature [Max]	Package / Case	Impedance (Max) (Zzt) [Max]
Microchip Technology 1N4739AUR	DO-213AB	5 %	1.2 V	9.1 V	1 W	Surface Mount	10 µA	-65 ░C	347 °F	DO-213AB, MELF (Glass)	5 Ohms
Microchip Technology 1N4739AUR/TR	DO-213AB (MELF, LL41)	5 %	1.2 V	9.1 V	1 W	Surface Mount	10 µA	-65 ░C	347 °F	DO-213AB, MELF (Glass)	5 Ohms

Catalog

Zener Diode Single 2-Pin 9.1V, 5%, 5Ohm, 1000mW, DO-213AB Bag

Key Features

- Electrically similar to the JEDEC registered 1N4728 thru 1N4764 Zener series.

- Zener voltages available 3.3V to 100V.

- Standard voltage tolerances are +/- 5% with "A" suffix and 10 % with no suffix identification.

- Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively.

- Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers.

- Surface mount equivalents also available as SMAJ4728A to SMAJ4764A and SMAJ4728A to SMAJ4764A.

- RoHS Compliant devices also available by adding e3 suffix Plastic body axial-leaded Zener equivalents are also available as 1N4728A to 1N4764A.

- Regulates voltage over a broad operating current and temperature range.

- Wide selection from 3.3 to 100V.

- Leadless package for surface mounting.

- Ideal for high density mounting.

- Nonsensitive to ESD.

- Hermetically sealed glass package.

- Specified capacitance (see Figure 2).

- Inherently radiation hard per MicroNote 050.

Description

This surface mountable 1 watt Zener diode series is electrically equivalent to the 1N4728A thru 1N4764A registration in the DO-41 equivalent package except that it meets the JEDEC surface mount outline DO-213AB. It is an ideal selection for applications of high density and low parasitic requirements for voltage regulation. Standard voltage tolerance is +/- 5% with tighter tolerances available down to 1%. With its glass hermetic qualities, it may also be used for high reliability applications when required by a source control drawing (SCD).