Zenode.ai Logo

ZL30735A Series

5-Channel SyncE&1588 Network Synchronizer with eToD interface

Manufacturer: Microchip Technology

Catalog

5-Channel SyncE&1588 Network Synchronizer with eToD interface

Key Features

Highlights* Combined with IEEE 1588-2008 Precision Time Protocol Stack and Synchronization Algorithm software modules
* Ultra Precise Timing for 5G Radio Access Networks
* Five independent DPLL clock channels plus three additional DPLLs for NCO Hybrid, Split XO and redundant oscillator modes
* Five output synthesizers
* Any-to-any frequency conversion per channel
* Inputs: up to 10, differential or single-ended
* Outputs: up to 10 differential, up to 20 CMOS
* Output jitter 100 fs RMS typical for 156.25 MHz 12 kHz to 20 MHz
* Core power consumption <0.9W
Packet and/or physical-layer frequency, phase and time synchronization* Physical-layer compliance with ITU-T G.8262, G.8262.1, G.813, G.812, Telcordia GR-1244, GR-253
* Packet-timing compliance with ITU-T G.8261, G.8263, G.8273.2 (class A,B,C,D), G.8273.4
* Enables 5G wireless applications with sub-100 ns time/phase alignment requirements
* Hitless reference switching
General Features* Automatic self-configuration at power-up from internal Flash memory, 7 configurations
* Input-to-output alignment <100 ps
* Numerically controlled oscillator behavior in each DPLL and each synthesizer
* Easy-to-configure design requires no external VCXO or loop filter components
* 5 GPIO pins with many possible behaviors, each REF can be GPI, each OUT can be GPO
* SPI or I2C processor Interface
* 1.8V and 3.3V core VDD voltages
* Easy-to-use evaluation/programming software
* MiToDSync 1-wire time-of-day interface in/out
* MiToDBasic 3-wire time-of-day interface out

Description

AI
The ZL30735A is a feature-rich network synchronization solution with up to eight independent DPLLs, five extremely low output jitter synthesizers and embedded time-of-day (eToD) features combined with IEEE 1588-2008 Precision Time Protocol Stack and Synchronization Algorithm software modules. The eToD features include a 3-wire MiToDBasic output interface and a 1-wire MiToDSync input/output interface. This solution is ideal for applications such as routers, switches, optical transparent network and 4G/5G wireless base stations (CU/DU/RU). We also have ZL3064x as line card jitter attenuators, such as [**ZL30642A**](https://www.microchip.com/en-us/product/zl30642a), to form full SyncE&IEEE1588 Timing solution for any rack system. [Click here to know about our full IEEE1588 software solution and profiles we can support.](https://www.microchip.com/en-us/product/zls30390)