SST25WF080 Series

8 Mbit 1.65 - 1.95V SPI Serial Flash

Catalog

8 Mbit 1.65 - 1.95V SPI Serial Flash

Part	Package / Case	Supplier Device Package	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Clock Frequency	Write Cycle Time - Word, Page	Voltage - Supply [Max]	Voltage - Supply [Min]	Technology	Memory Interface	Memory Format	Memory Type	Memory Size	Memory Organization [custom]	Memory Organization [custom]	Package / Case [y]	Package / Case [x]
Microchip Technology SST25WF080BT-40I/NP	8-UFDFN Exposed Pad	8-USON (2x3)	Surface Mount	85 °C	-40 °C	40 MHz	1 ms	1.95 V	1.65 V	FLASH	SPI	FLASH	Non-Volatile	1024 KB	1 M	8 bits
Microchip Technology SST25WF080B-40I/SN	8-SOIC	8-SOIC	Surface Mount	85 °C	-40 °C	40 MHz	1 ms	1.95 V	1.65 V	FLASH	SPI	FLASH	Non-Volatile	1024 KB	1 M	8 bits	3.9 mm	0.154 in
Microchip Technology SST25WF080B-40E/SN	8-SOIC	8-SOIC	Surface Mount	125 °C	-40 °C	80 MHz	1 ms	1.95 V	1.65 V	FLASH	SPI	FLASH	Non-Volatile	1024 KB	1 M	8 bits	3.9 mm	0.154 in
Microchip Technology SST25WF080-75-4I-ZAE	8-UFBGA, CSPBGA	8-CSP	Surface Mount	85 °C	-40 °C	75 MHz	25 µs	1.95 V	1.65 V	FLASH	SPI	FLASH	Non-Volatile	1024 KB	1 M	8 bits
Microchip Technology SST25WF080BT-40I/CS	8-UFBGA, CSPBGA	8-CSP	Surface Mount	85 °C	-40 °C	40 MHz	1 ms	1.95 V	1.65 V	FLASH	SPI	FLASH	Non-Volatile	1024 KB	1 M	8 bits
Microchip Technology SST25WF080BT-40E/SN	8-SOIC	8-SOIC	Surface Mount	125 °C	-40 °C	80 MHz	1 ms	1.95 V	1.65 V	FLASH	SPI	FLASH	Non-Volatile	1024 KB	1 M	8 bits	3.9 mm	0.154 in

Catalog

8 Mbit 1.65 - 1.95V SPI Serial Flash

Key Features

• * Single Voltage Read and Write Operations - 1.65-1.95V

• * Serial Peripheral Interface (SPI) Architecture Mode 0 and Mode 3

• * High Speed Clock Frequency up to 40MHz

• * Dual Input/Output Support

• * Superior Reliability Endurance of 100,000 Cycles with greater than 20 years Data Retention

• * Ultra-Low Power Consumption: - Active Read Current: 4 mA (typical) - Standby Current: 10 µA (typical) - Power-down Mode Standby Current: 4 µA (typical)

• * Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 64 KByte overlay blocks

• * Page Program Mode up to 256 Bytes/Page

• * Fast Erase and Page-Program: - Chip-Erase Time: 500 ms (typical) - Sector-Erase Time: 40 ms (typical) - Block-Erase Time: 80 ms (typical) - Page-Program Time: 0.8 ms/ 256 bytes (typical)

• * End-of-Write Detection with Software polling the BUSY bit in Status Register

• * Hold Pin (HOLD#) to Suspend a serial sequence without deselecting the device

• * Write Protection Pin (WP#) - Enables/Disables the Lock-Down function of the status register

• * Software Write Protection- Write protection through Block-Protection bits in status register

• * Temperature Range: Industrial -40°C to +85°C, Extended -40°C to +125°C

• * Automotive AEC-Q100 Qualified Grade 1 and 3

• * Packages Available: 8-lead SOIC (150 mils), 8-contact USON (2mm x 3mm), WLCSP

• * All devices are RoHS compliant

Description

SST25WF080B is a member of the Serial Flash 25 Series family and feature a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SPI serial flash memory is manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. This Serial Flash significantly improve performance and reliability, while lowering power consumption. The device writes (Program or Erase) with a single power supply of 1.65-1.95V. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies.