AP22654 Series

Precision Adjustable Current-Limit Power Switches

Catalog

Precision Adjustable Current-Limit Power Switches

Part	Switch Type	Voltage - Load [Min]	Voltage - Load [Max]	Rds On (Typ)	Features	Output Configuration	Mounting Type	Input Type	Interface	Output Type	Package / Case	Voltage - Supply (Vcc/Vdd)	Operating Temperature [Max]	Operating Temperature [Min]	Fault Protection	Supplier Device Package	Current - Output (Max) [Max]	Ratio - Input:Output [custom]	Number of Outputs
Diodes Inc AP22654WU-7	General Purpose	3 V	5.5 V	50 mOhm	Load Discharge Slew Rate Controlled Status Flag	High Side	Surface Mount	Non-Inverting	On/Off	P-Channel	SOT-23-6 Thin TSOT-23-6		85 °C	-40 °C	Current Limiting (Fixed) Over Temperature Reverse Current Short Circuit UVLO	TSOT-26 (Type A1)	3.14 A	1:1	1

Catalog

Precision Adjustable Current-Limit Power Switches

Key Features

• Up to 3.1A Maximum Load Current

• Accurate Adjustable Current Limit, 0.4A to 3.56A

• ±12% Accurate Adjustable Current Limit, 1.0A with RLIM= 6.8kΩ

• Constant Current During Overcurrent

• Fast Short-Circuit Response Time: 5µs (typ)

• Reverse Current Blocking During Shutdown and Reverse Current Limiting During Enable

• Operating Range: 3.0V to 5.5V

• Built-in Soft-Start with 1.0ms Typical Rise Time

• Overcurrent, Reverse Output Current/Voltage and Thermal Protection

• Fault Report (FAULT) with Blanking Time

• ESD Protection: 2kV HBM, 1.5kV CDM

• Active Low (AP22654) or Active High (AP22655) Enabled

• TSOT26 (Type A1) Package: Available in "Green" Molding Compound (No Br, Sb)

• 15kV ESD Protection per IEC 61000-4-2 (With Ext. Capacitance)

• UL Recognized, File Number E322375, Vol. 1

• IEC62368-1 CB Scheme Certified

• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. "Green" Device (Note 3)

• An automotive-compliant part is available under separate datasheet (AP22654Q/AP22655Q)

Description

The AP22654 and AP22655 are single-channel precision adjustable current-limit switches optimized for applications that require precision current limiting, or to provide up to 3.1A of continuous load current during heavy loads/short circuits. These devices offer a pin-strapped current-limit threshold between 0.4A and 3.56A (typ) via an external resistor. Current limit accuracy ±12% can be achieved at high current-limit settings. The rise and fall times are controlled to minimize current surges during turn on/off.