LTC3589LTC3589-1LTC3589-2 Series

8-Output Regulator with Sequencing and I2C

Catalog

8-Output Regulator with Sequencing and I2C

Part	Mounting Type	Applications	Package / Case	Voltage - Supply [Min]	Voltage - Supply [Max]	Current - Supply	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]
Analog Devices LTC3589HUJ-1#TRPBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)
Analog Devices LTC3589HUJ-1#PBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)
Analog Devices LTC3589IUJ#TRA1PBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)	125 °C	-40 °C
Analog Devices LTC3589EUJ	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)	125 °C	-40 °C
Analog Devices LTC3589HUJ#TRPBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)
Analog Devices LTC3589EUJ-2#PBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)	125 °C	-40 °C
Analog Devices LTC3589IUJ-1#TRPBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)	125 °C	-40 °C
Analog Devices LTC3589HUJ-2#PBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)
Analog Devices LTC3589EUJ-2#TRPBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)	125 °C	-40 °C
Analog Devices LTC3589EUJ#PBF	Surface Mount	Handheld/Mobile Devices OMAP™	40-WFQFN Exposed Pad	2.7 V	5.5 V	8 µA	40-QFN (6x6)	125 °C	-40 °C

Catalog

8-Output Regulator with Sequencing and I2C

Key Features

• Triple I2C Adjustable High Efficiency Step-Down DC/DC Converters: 1.6A, 1A/1.2A, 1A/1.2A

• High Efficiency 1.2A Buck-Boost DC/DC Converter

• Triple 250mA LDO Regulators

• Pushbutton ON/OFF Control with System Reset

• Flexible Pin-Strap Sequencing Operation

• I2C and Independent Enable Control Pins

• Power Good and Reset Outputs

• Dynamic Voltage Scaling and Slew Rate Control

• Selectable 2.25MHz or 1.12MHz Switching Frequency

• Always-Alive 25mA LDO Regulator

• 8μA Standby Current

• 40-Pin 6mm × 6mm × 0.75mm QFN

• Click here for Freescale i.MX53 reference design and driver support information

Description

The LTC3589 is a complete power management solution for ARM and ARM-based processors and advanced portable microprocessor systems. The device contains three step-down DC/DC converters for core, memory and SoC rails, a buck-boost regulator for I/O at 1.8V to 5V and three 250mA LDO regulators for low noise analog supplies. An I2C serial port is used to control enables, output voltage levels, dynamic voltage scaling, operating modes and status reporting. Differences between the LTC3589, LTC3589-1, and LTC3589-2 are summarized in Table 1.Regulator start-up is sequenced by connecting outputs to enable pins in the desired order or programmed via the I2C port. System power-on, power-off, and reset functions are controlled by pushbutton interface, pin inputs, or I2C interface.The LTC3589 supports i.MX53/51, PXA and OMAP processors with eight independent rails at appropriate power levels. Other features include interface signals such as the VSTB pin that simultaneously toggle up to four rails between programmed run and standby output voltages. The device is available in a low profile 40-pin 6mm × 6mm exposed pad QFN package.LTC3589LTC3589-1LTC3589-2Power-On Inhibit Enable Delay1 second2ms2msBuck 2 & 3 Current Output1A1.2A1.2APGOOD Fault TimeoutEnabled Default, I2C DisableDisabled by Default, I2C EnableDisabled by Default, I2C EnablePWR_ON to WAKE Delay50ms2ms2msLDO3 Vout1.8V2.8V2.8VLDO4 Vout1.8V, 2.5V, 2.8V, 3.3V1.2V, 1.8V, 2.5V, 3.2V1.2V, 1.8V, 2.5V, 3.2VLDO4 Vout1.8V, 2.5V, 2.8V, 3.3V1.2V, 1.8V, 2.5V, 3.2V1.2V, 1.8V, 2.5V, 3.2VDefault LDO4 EnableLDO34_EN (Pin) or I2CI2C OnlyI2C OnlyWait to Enable Until Output < 300mVYes. Change with I2CYes. Change with I2CNo. Change with I2CInsert 2.5K Discharge Resistor When DisabledYes when Wait to Enable Until Output < 300mVYes when Wait to Enable Until Output < 300mVAlways inserted when regulator disabledApplicationsHandheld Instruments and ScannersPortable Industrial DevicesAutomotive InfotainmentMedical DevicesHigh End Consumer DevicesMultirail SystemsSupports Freescale i.MX53/51, Marvell PXA and Other Application Processors