Zenode.ai Logo
Beta
K

LT3684 Series

36V, 2A, 2.8MHz Step-Down Switching Regulator

Manufacturer: Analog Devices

Catalog

36V, 2A, 2.8MHz Step-Down Switching Regulator

Key Features

• Wide Input Range: 3.6V to 34V Operating, 36V Maximum
• 2A Maximum Output Current
• Adjustable Switching Frequency: 300kHz to 2.8MHz
• Low Shutdown Current: IQ< 1µA
• Integrated Boost Diode
• Power Good Flag
• Saturating Switch Design: 0.18Ω On-Resistance
• 1.265V Feedback Reference Voltage
• Output Voltage: 1.265V to 20V
• Soft-Start Capability
• Small 10-Pin Thermally Enhanced MSOP and (3mm × 3mm) DFN Packages

Description

AI
The LT3684 is an adjustable frequency (300kHz to 2.8MHz) monolithic buck switching regulator that accepts input voltages up to 34V (36V maximum). A high efficiency 0.18Ω switch is included on the die along with a boost Schottky diode and the necessary oscillator, control and logic circuitry. Current mode topology is used for fast transient response and good loop stability. The LT3684’s high operating frequency allows the use of small, low cost inductors and ceramic capacitors resulting in low output ripple while keeping total solution size to a minimum. The low current shutdown mode reduces input supply current to less than 1µA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUTreaches 90% of the programmed output voltage. The LT3684 is available in 10-Pin MSOP and 3mm × 3mm DFN packages with Exposed Pads for low thermal resistance.ApplicationsAutomotive Battery RegulationPower for Portable ProductsDistributed Supply RegulationIndustrial SuppliesWall Transformer Regulation