MAX15090 Series

2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output

Manufacturer: Analog Devices Inc./Maxim Integrated

Catalog

2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output

Part	Operating Temperature (Min)	Operating Temperature (Max)	Package Name	Package Length	Package Width	Voltage - Supply (Maximum)	Voltage - Supply (Minimum)	Programmable Features	Package / Case	Current - Supply	Internal Switch(s)	Type	Features	Mounting Type	Applications	Number of Channels	Current - Output (Max)	Supplied Contents	Contents	Function	Utilized IC / Part	Embedded
Analog Devices Inc./Maxim Integrated MAX15090EWI+T	-40 °C	85 °C	28-WLP	2.07 mm	3.53 mm	18 V	2.7 V	Circuit Breaker Current Limit Fault Timeout OVP Slew Rate UVLO	28-WFBGA WLBGA	500 µA	Yes	Hot Swap Controller	Latched Fault Thermal Limit	Surface Mount	General Purpose	1	12 A
Analog Devices Inc./Maxim Integrated MAX15090BEVKIT#												Power Management						Board(s)	Board	Hot Swap Controller	MAX15090B	No
Analog Devices Inc./Maxim Integrated MAX15090EVKIT#												Power Management						Board(s)	Board	Hot Swap Controller	MAX15090	No
Analog Devices Inc./Maxim Integrated MAX15090CEWI+T	-40 °C	85 °C	28-WLP	2.07 mm	3.53 mm	18 V	2.7 V	Circuit Breaker Current Limit Fault Timeout OVP Slew Rate UVLO	28-WFBGA WLBGA	500 µA	Yes	Hot Swap Controller	Auto Retry Thermal Limit	Surface Mount	General Purpose	1	12 A
Analog Devices Inc./Maxim Integrated MAX15090BEWI+T	-40 °C	85 °C	28-WLP	2.07 mm	3.53 mm	18 V	2.7 V	Circuit Breaker Current Limit Fault Timeout OVP Slew Rate UVLO	28-WFBGA WLBGA	500 µA	Yes	Hot Swap Controller	Latched Fault Thermal Limit	Surface Mount	General Purpose	1	12 A

Catalog

2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output

Description

The MAX15090B/MAX15090C ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit line cards from a live backplane. The devices integrate a hot-swap controller, 6mΩ power MOSFET, and an electronic circuit-breaker protection in a single package.The devices integrate an accurate current-sense circuitry and provide 220µA/A of proportional output current. The devices are designed for protection of 2.7V to 18V supply voltages.These devices implement a foldback current limit during startup to control inrush current lowering di/dt and keep the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, the MAX15090B latches off, while the MAX15090C enters autoretry mode.The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have overvoltage/undervoltage input pins that can detect an overvoltage/undervoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection, power-good output, and fault-indicator output.The MAX15090B/MAX15090C ICs are available in a 28-bump, 2.07mm x 3.53mm, power wafer-level package (WLP) and are rated over the -40°C to +85°C extended temperature range.ApplicationsDisk Drive PowerIndustrialRAID SystemsServer I/O CardsStorage Bridge Bay