Catalog
Negative Voltage Hot Swap Controller with Energy Monitor
Key Features
• Allows Safe Insertion into Live –48V Backplanes
• Protects MOSFET with SOA Timer
• Programmable 15mV to 30mV Current Limit Sense Voltage with <3.3% Accuracy and Adjustable Foldback
• 8-Bit to 16-Bit Gear-Shift ADC with 0.7% Accuracy
• Monitors Voltages, Currents, Power and Energy
• Nonvolatile Configuration and Fault Recording
• Floating Topology for Rugged High Voltage Operation
• Selectable Inrush Control: dV/dt or Current Limit
• I2C/SMBus or Single-Wire Broadcast Interfaces
• Min/Max ADC Measurement Logging with Alerts
• Reboots on I2C Command with Programmable Delay
• Adjustable Input UV/OV Thresholds and Hysteresis
• 38-Pin 5mm × 7mm QFN Package
Description
AI
The LTC4283 negative voltage hot swap controller drives an external N-channel MOSFET to allow a board to be safely inserted and removed from a live backplane. The device features programmable current limit with foldback and independently adjustable inrush current to optimize the MOSFET safe operating area (SOA). The SOA timer limits MOSFET temperature rise for reliable protection against overstresses.An I2C interface and onboard gear-shift ADC allow monitoring of board current, voltage, power, energy, and fault status. An available single-wire broadcast mode simplifies the interface by eliminating two isolators. The included EEPROM provides black-box capturing and nonvolatile configuration of fault behavior.Additional features respond to input UV/OV, interrupt the host when a fault has occurred, notify when output power is good, detect insertion of a board, turn off the MOSFET if an external supply monitor fails to indicate power good within a timeout period, and auto-reboot after a programmable delay following a host commanded turn-off.APPLICATIONSTelecom Infrastructure–48V Distributed Power SystemsServers and Data CentersPower Monitors