LTM4647 Series

30A DC/DC Step-Down μModule Regulator

Catalog

30A DC/DC Step-Down μModule Regulator

Part	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Input (Max) [Max]	Number of Outputs	Type	Supplier Device Package	Current - Output (Max) [Max]	Voltage - Input (Min) [Min]	Efficiency	Size / Dimension [y]	Size / Dimension [y]	Size / Dimension [x]	Size / Dimension [z]	Size / Dimension [x]	Size / Dimension [z]	Applications	Mounting Type	Voltage - Output 1 [Max]	Voltage - Output 1 [Min]	Features	Package / Case
Analog Devices LTM4647EY#PBF	125 °C	-40 °C	15 V	1	Non-Isolated PoL Module	77-BGA (15x9)	30 A	4.7 V	87 %	0.35 "	9 mm	15 mm	5 mm	0.59 in	0.2 "	ITE (Commercial)	Surface Mount	1.8 V	0.6 V	OCP OVP UVLO	77-BBGA Module
Analog Devices LTM4647IY#PBF	125 °C	-40 °C	15 V	1	Non-Isolated PoL Module	77-BGA (15x9)	30 A	4.7 V	87 %	0.35 "	9 mm	15 mm	5 mm	0.59 in	0.2 "	ITE (Commercial)	Surface Mount	1.8 V	0.6 V	OCP OVP UVLO	77-BBGA Module

Catalog

30A DC/DC Step-Down μModule Regulator

Key Features

• 4.7V to 15V Input Voltage Range

• 0.6V to 1.8V Output Voltage Range

• 30A DC Output Current

• ±1.2% Total DC Output Voltage Error (–40°C to 125°C)

• High Reliability N + 1 Phase Redundancy Supported

• Internal or External Control Loop Compensation

• Differential Remote Sense Amplifier for Precision Regulation

• Current Mode Control/Fast Transient Response

• Multiphase Current Sharing Up to 180A

• Built-In Temperature Monitoring

• Selectable Pulse-Skipping, Burst Mode®Operation

• Soft-Start/Voltage Tracking

• Frequency Synchronization

• Output Overvoltage Protection

• Output Overcurrent Foldback Protection

• 9mm × 15mm × 5.01mm BGA Package

Description

The LTM4647 is a complete 30A output switching mode step-down DC/DC μModule®(power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V to 1.8V, set by a single external resistor. Only a few input and output capacitors are needed.Its high efficiency design delivers 87% efficiency from 12V input to 1.0V output with 30A continuous load current. High switching frequency and a current-mode architecture enable a very fast transient response to line and load changes without sacrificing stability. The device supports frequency synchronization, programmable multiphase operation, N+1 phase redundancy, and output voltage tracking for supply rail sequencing.Fault protection features include overvoltage and overcurrent protection. The power module is offered in a space saving 9mm × 15mm × 5.01mm BGA package. The LTM4647 is available with SnPb (BGA) or RoHS compliant terminal finish.ApplicationsTelecom, Networking and Industrial EquipmentPoint of Load Regulation