LTC6416 Series

2GHz Low Noise Differential 16-Bit ADC Buffer

Catalog

2GHz Low Noise Differential 16-Bit ADC Buffer

Part	Output Type	Slew Rate	Voltage - Supply Span (Max) [Max]	Current - Input Bias	Current - Supply	Amplifier Type	Number of Circuits	Voltage - Supply Span (Min) [Min]	Mounting Type	Voltage - Input Offset	Operating Temperature [Max]	Operating Temperature [Min]	Current - Output / Channel	-3db Bandwidth	Package / Case	Supplier Device Package
Analog Devices LTC6416IDDB#TRPBF	Differential	3400 V/µs	3.9 V	5 µA	42 mA	Buffer	1	2.7 V	Surface Mount	500 çV	85 °C	-40 °C	20 mA	2 GHz	10-WFDFN Exposed Pad	10-DFN (3x2)
Analog Devices LTC6416CDDB#TRPBF	Differential	3400 V/µs	3.9 V	5 µA	42 mA	Buffer	1	2.7 V	Surface Mount	500 çV	70 °C	0 °C	20 mA	2 GHz	10-WFDFN Exposed Pad	10-DFN (3x2)

Catalog

2GHz Low Noise Differential 16-Bit ADC Buffer

Key Features

• 2GHz –3dB Small Signal Bandwidth

• 300MHz ±0.1dB Bandwidth

• 1.8nV/√HzOutput Noise

• 46.25dBm Equivalent OIP3 at 140MHz

• 40.25dBm Equivalent OIP3 Up to 300MHz

• –81dBc/–72dBc HD2/HD3 at 140MHz, 2VP-POut

• –84.5dBc IM3 at 140MHz, 2VP-POut Composite

• –72.5dBc IM3 at 300MHz, 2VP-POut Composite

• –74dBc/–67.5dBc HD2/HD3 at 300MHz, 2VP-POut

• Programmable High Speed, Fast Recovery Output Clamping

• DC-Coupled Signal Path

• Operates on Single 2.7V to 3.9V Supply

• Low Power: 150mW on 3.6V

• 2mm × 3mm 10-Pin DFN Package

Description

The LTC6416 is a differential unity gain buffer designed to drive 16-bit ADCs with extremely low output noise and excellent linearity beyond 300MHz. Differential input impedance is 12kΩ, allowing 1:4 and 1:8 transformers to be used at the input to achieve additional system gain.With no external biasing or gain setting components and a flow-through pinout, the LTC6416 is very easy to use. It can be DC-coupled and has a common mode output offset of –40mV. If the input signals are AC-coupled, the LTC6416 input pins are internally biased to provide an output common mode voltage that is set by the voltage on the VCMpin.In addition the LTC6416 has high speed, fast recovery clamping circuitry to limit output signal swing. Both the high and low clamp voltages are internally biased to allow maximum output swing but are also user programmable via the CLLO and CLHI pins.Supply current is nominally 42mA and the LTC6416 operates on supply voltages ranging from 2.7V to 3.9V.The LTC6416 is packaged in a 10-lead 3mm × 2mm DFN package. Pinout is optimized for placement directly adjacent to Linear’s high speed 12-, 14- and 16-bit ADCs.ApplicationsDifferential ADC DriverIF Sampling ReceiversImpedance TransformerSAW Filter InterfaceCCD Buffer