PI3USB30E Series

High-Speed USB2.0 1:2 Multiplexer/DeMultiplexer Switch with Signal Enable

Catalog

High-Speed USB2.0 1:2 Multiplexer/DeMultiplexer Switch with Signal Enable

Part	Package / Case	Voltage - Supply, Single (V+) [Min]	Voltage - Supply, Single (V+) [Max]	Applications	Multiplexer/Demultiplexer Circuit	Switch Circuit	Number of Channels [custom]	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	-3db Bandwidth	Features	Supplier Device Package [x]	Supplier Device Package	Supplier Device Package [y]	On-State Resistance (Max) [Max]
Diodes Inc PI3USB30EZMEX	10-UFQFN	1.8 V	4.3 V	USB	2:1	SPDT	2	85 °C	-40 °C	Surface Mount	850 MHz	Bi-Directional USB 2.0	1.8	10-UQFN	1.4	6.5 Ohm

Catalog

High-Speed USB2.0 1:2 Multiplexer/DeMultiplexer Switch with Signal Enable

Key Features

• USB 2.0 compliant (high speed and full speed)

• RON is 4.3A typical @ VDD = 3.0V

• Low bit-to-bit skew

• Low Crosstalk: -41dB @ 240 MHz

• Off Isolation: -35dB @ 240 MHz

• Wide -3db bandwidth: 850MHz

• Near-Zero propagation delay: 250ps

• Support for 1.8V/2.5V/3.3V Logic on Control pins Channel On Capacitance: 6.0pF

• VDD Operating Range: 1.8V to 4.3V 10%

• Data pin I/O ESD: >8kV HBM protection per JESD22 A114D specification

• I/O pins have over-voltage protection and can tolerate a short to Vbus

• Totally Lead-Free & Fully RoHS Compliant

• Halogen and Antimony Free. "Green" Device

• For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), pleasecontact usor your local Diodes representative.https://www.diodes.com/quality/product-definitions/

• Packaging (Pb-free & Green): 10-pin UQFN (ZM10)

Description

The PI3USB30E is a single differential channel 2:1 multiplexer/demultiplexer USB 2.0 Switch. Industry leading advantages include a propagation delay of less than 250ps, resulting from its low channel resistance and I/O capacitance. The device multiplexes differential outputs from a USB Host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high speed signals at the outputs. It is designed for low bit-to-bit skew, high channel-to-channel noise isolation and is compatible with various standards, such as High Speed USB 2.0 (480 Mb/s).