ADGS1408 Series

The ADGS1408 /ADGS1409are analog multiplexers comprising eight single channels and four differential channels, respectively. A serial peripheral interface (SPI) controls the switches. The SPI interface has robust error detection features such as cyclic redundancy check (CRC) error detection, invalid read/write address detection, and SCLK count error detection.It is possible to daisy-chain multiple ADGS1408 / ADGS1409 devices together. Daisy-chain mode enables the configuration of multiple devices with a minimal amount of digital lines. The ADGS1408 / ADGS1409 can also operate in burst mode to decrease the time between SPI commands.iCMOS construction ensures ultra low power dissipation, making the devices ideally suited for portable and battery-powered instruments.Each switch conducts equally well in both directions when on, and each switch has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked.The on-resistance profile is flat over the full analog input range, which ensures linearity and low distortion when switching audio signals.PRODUCT HIGHLIGHTSSPI interface removes the need for parallel conversion, logic traces, and reduces GPIO channel count.Daisy-chain mode removes additional logic traces when multiple devices are used.CRC error detection, invalid read/write address detection, and SCLK count error detection ensure a robust digital interface.CRC and error detection capabilities allow the use of the ADGS1408/ADGS1409 in safety critical systems.Minimal distortion.APPLICATIONSAutomated test equipmentData acquisition systemsBattery-powered systemsSample-and-hold systemsAudio signal routingVideo signal routingCommunications systemsRelay replacement