dsPIC30F2023 Series
Manufacturer: Microchip Technology
Catalog
Key Features
• High-Performance dsPIC30F core* Up to 30 MIPS operation
• * Modified Harvard architecture
• * C compiler optimized instruction set architecture
• * 24-bit wide instructions, 16-bit wide data path
• * DSP Engine for math intensive operations
• * Modulo and Bit-Reversed modes
• * Two 40-bit wide accumulators with optional saturation logic
• * 17-bit x 17-bit single-cycle hardware fractional/ integer multiplier
• * Single-cycle Multiply-Accumulate (MAC) operation
• * 40-stage Barrel Shifter
• * Dual data fetch
•
• Operating Conditions* 3.3V and 5.0V operation (±10%)
• * Industrial and Extended temperature ranges
•
• Peripheral Features* High-current sink/source I/O pins: 25 mA/25 mA
• * Three 16-bit timers/counters; optionally pair up 16-bit timers into 32-bit timer modules
• * Four 16-bit Capture input functions
• * Two 16-bit Compare/PWM output functions (Dual Compare mode available)
• * 3-wire SPI™ modules (supports 4 Frame modes)
• * I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing UART Module
•
• Power Supply PWM Module Features* Four PWM generators with 8 outputs
• * Each PWM generator has independent time base and duty cycle
• * Duty cycle resolution of 1.1 ns at 30 MIPS
• * Individual dead time for each PWM generator
• * Phase-shift resolution of 4.2 ns @ 30 MIPS
• * Frequency resolution of 8.4 ns @ 30 MIPS
• * Independent Current-Limit and Fault Inputs
• * Output Override Control
• * Special Event Trigger
• * PWM generated ADC Trigger
•
• Analog Features* 10- bit ADC with 2000 Ksps conversion rate
• * Up to 12 input channels
• * "Conversion pairing" allows simultaneous conversion of two inputs (i.e., current and voltage) with a single trigger
• * PWM control loop with up to six conversion pairs where each conversion pair has up to four PWM and seven other selectable trigger sources
• * Interrupt hardware supports up to 1M interrupts per second
•
• Comparator* Four Analog Comparators with 20 ns response time and 10-bit DAC reference generator
• * PWM module interface with Duty Cycle Control, Period Control and Fault Detect
• * Special Event Trigger
• * PWM-generated ADC Trigger
•
• Special Microcontroller Features* Enhanced Flash program memory with 10,000 erase/write cycle (min.) for industrial temperature range, 100k (typical)
• * Self-reprogrammable under software control
• * Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• * Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
• * Fail-Safe clock monitor operation
• * Detects clock failure and switches to on-chip low power RC oscillator
• * Programmable code protection
• * In-Circuit Serial Programming™ (ICSP™)
• * Selectable Power Management modes: Sleep, Idle and Alternate Clock modes
Description
AI
dsPIC30F SMPS & Digital Power Conversion 16-bit Digital Signal Controller. These devices offer features supporting common, multi-loop digital switch-mode power supplies (SMPS) and other digital power-conversion applications such as:
• AC to DC Converters
• DC to DC Converters
• Power Factor Correction (PFC)
• Uninterruptible power supply (UPS)
• Inverters
• Embedded Power-Supply Controllers
• Circuit Breakers, Arc Fault Detection
• Digital Lighting