Zenode.ai Logo

Catalog

Key Features

* Recovers and transmits network synchronization over Ethernet, IP, MPLS networks
* Capable of server, client and Boundary Node operation
* Integrates one digital phase locked loops
* Recovers clocks from two independent servers, with hitless switching between packet streams for redundancy
* Hitless switching from Packet to Packet, Packet to Electrical, Electrical to Packet
* Accepts eight input references, and up to three associated low frequency alignment or framing pulses
* Generates up to four separate output clocks at frequencies between 8 kHz and 100 MHz
* Generates two separate Synchronous Ethernet clocks to drive industry standard Ethernet PHY devices at either 25 MHz or 125 MHz
* Typical Applications
+ ITU-T G.8262 System Timing Cards which support 1 GbE and 10 GbE interfaces
+ Telcordia GR-253 Carrier Grade SONET/SDH Stratum 3 System Timing Cards
+ System Timing Cards which supports ITU-T G.781 SETS (SDH Equipment Timing Source)
+ Integrated basestation reference clock for air interface for GSM, WCDMA, LTE and WiMAX macro, micro or femtocells
+ Mobile Backhaul NID, edge router or access aggregation node
+ EPON/GE-PON & GPON OLT
+ EPON/GE-PON & GPON ONU/OLT
+ DSLAM and RT-DSLAM

Description

AI
The ZL30342 is a member of a family of footprint-compatible devices offering the full range of features required for timing and synchronization across packet networks. This device focus on the Clock Recovery, Servo Mechanism and Clock Generation for Synchronization using IEEE-1588. They work seamlessly with Time Stamp solutions from all the major Switch/PHY NPU/CPU vendors. This single chip device offer both packet timing using IEEE-1588 Precision Time Protocol (PTP) and Synchronous Ethernet (SyncE) capable of driving the physical layer clock with the required very low jitter. The ZL30342 offers a full Stratum 3 DPLL, ideal for Timing Card applications and supports clock recovery over L2 and L3 networks for all wireless applications.