ZL40241 Series

3:10 LVCMOS Output Low Jitter ePPS Fanout Buffer

Catalog

3:10 LVCMOS Output Low Jitter ePPS Fanout Buffer

Part	Number of Circuits	Voltage - Supply [Max]	Voltage - Supply [Min]	Input	Operating Temperature [Max]	Operating Temperature [Min]	Output	Supplier Device Package	Differential - Input:Output	Package / Case	Ratio - Input:Output	Type	Frequency - Max [Max]	Mounting Type
Microchip Technology ZL40241LDG1	1	3.465 V	1.35 V	CML, HCSL, LVCMOS, LVDS, LVPECL, SSTL	85 °C	-40 °C	LVCMOS	32-QFN (5x5)	Yes/No	32-VFQFN Exposed Pad	3:10	Fanout Buffer (Distribution), Multiplexer	200 MHz	Surface Mount
Microchip Technology ZL40241LDG1
Microchip Technology ZL40241LDG1
Microchip Technology ZL40241LDF1
Microchip Technology ZL40241LDF1	1	3.465 V	1.35 V	CML, HCSL, LVCMOS, LVDS, LVPECL, SSTL	85 °C	-40 °C	LVCMOS	32-QFN (5x5)	Yes/No	32-VFQFN Exposed Pad	3:10	Fanout Buffer (Distribution), Multiplexer	200 MHz	Surface Mount

Catalog

3:10 LVCMOS Output Low Jitter ePPS Fanout Buffer

Key Features

- 3 to 1 input Multiplexer: Two inputs accept any differential (LVPECL, HCSL, LVDS, SSTL, CML, LVCMOS) or a single ended signal and the third input accepts a crystal or a single ended signal

- Supports frequencies from 0 to 200MHz

- Ten 1.5V/1.8V/2.5V/3.3V LVCMOS outputs

- Supports crystals from 8MHz to 60MHz

- Ultra-low additive jitter: 17fs (12kHz to 20MHz)

- Ultra-low noise floor of -170dBc/Hz

- Supports 2.5V or 3.3V power supplies

- Output to output skew of 30ps (typical)

- Input to output delay of 2ns (typical)

- ePPS clock buffer on Timing Module

Description

The ZL40241 is a pin controlled low additive jitter, low power 3 x 10 LVCMOS ePPS fanout buffer. Two inputs can accept signal in differential (LVPECL, SSTL, LVDS, HSTL, CML) or single ended (LVPECL or LVCMOS) format and the third input can accept a single ended signal or it can be used to build a crystal oscillator by connecting an external crystal resonator between its XIN and XOUT pins. The ZL40241 has ten LVCMOS outputs which can be powered from 3.3V, 2.5V, 1.8V or 1.5V supply. Output can be synchronously enabled/disabled via OE pin. The device operates from 2.5V+/-5% or 3.3V+/-5% supply. Its operation is guaranteed over the industrial temperature range -40°C to +85°C.