MAX1190 Series

Dual 10-Bit, 120Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs

Manufacturer: Analog Devices Inc./Maxim Integrated

Catalog

Dual 10-Bit, 120Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs

Part	Architecture	Package Width	Package Name	Package Length	Package / Case	Sampling Rate (Per Second)	Number of Inputs	Features	Number of A/D Converters	Reference Type	Ratio - ADC	Ratio - S/H	Configuration	Number of Bits	Voltage - Supply, Digital (Max)	Voltage - Supply, Digital (Min)	Mounting Type	Data Interface	Voltage - Supply, Analog (Min)	Voltage - Supply, Analog (Max)	Input Type	Operating Temperature (Min)	Operating Temperature (Max)
Analog Devices Inc./Maxim Integrated MAX1190ECM+D	Pipelined	7 mm	48-TQFP-EP	7 mm	48-TQFP Exposed Pad	120 MHz	2	Simultaneous Sampling	2 count	External Internal	1	1	S/H-ADC	10 bits	3.6 V	3.1 V	Surface Mount	Parallel	3.1 V	3.6 V	Differential Single Ended	-40 °C	85 °C
Analog Devices Inc./Maxim Integrated MAX1190ECM+TD	Pipelined	7 mm	48-TQFP-EP	7 mm	48-TQFP Exposed Pad	120 MHz	2	Simultaneous Sampling	2 count	External Internal	1	1	S/H-ADC	10 bits	3.6 V	3.1 V	Surface Mount	Parallel	3.1 V	3.6 V	Differential Single Ended	-40 °C	85 °C

Catalog

Dual 10-Bit, 120Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs

Description

The MAX1190 is a 3.3V, dual 10-bit analog-to-digital converter (ADC) featuring fully differential wideband track-and-hold (T/H) inputs, driving two ADCs. The MAX1190 is optimized for low power, small size, and high-dynamic performance for applications in imaging, instrumentation, and digital communications. This ADC operates from a single 3.1V to 3.6V supply, consuming only 492mW while delivering a typical signal-to-noise and distortion (SINAD) of 57dB at an input frequency of 60MHz and a sampling rate of 120Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters can also be operated with single-ended inputs. In addition to low operating power, the MAX1190 features a 3mA sleep mode, as well as a 1µA power-down mode to conserve power during idle periods.An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of this internal or an externally applied reference, if desired, for applications requiring increased accuracy or a different input voltage range.The MAX1190 features parallel, CMOS-compatible three-state outputs. The digital output format can be set to two's complement or straight offset binary through a single control pin. The device provides for a separate output power supply of 1.7V to 3.6V for flexible interfacing with various logic families. The MAX1190 is available in a 7mm x 7mm, 48-pin TQFP-EP package, and is specified for the extended industrial (-40°C to +85°C) temperature range.Pin-compatible lower speed versions of the MAX1190 are also available. Refer to the MAX1180–MAX1184 data sheets for 105Msps/80Msps/65Msps/40Msps. In addition to these speed grades, this family includes two multiplexed output versions (MAX1185/MAX1186 for 20Msps/40Msps), for which digital data is presented time-interleaved and on a single, parallel 10-bit output port.For lower speed, pin-compatible, 8-bit versions of the MAX1190, refer to the MAX1195–MAX1198 data sheets.ApplicationsBaseband I/Q SamplingBattery-Powered InstrumentationMultichannel IF SamplingSet-Top BoxesUltrasound and Medical ImagingVSAT TerminalsWLAN, WWAN, WLL, MMDS Modems