ATWINC1510-IC Series

IEEE 802.11 b/g/n IoT Network Controller

Catalog

IEEE 802.11 b/g/n IoT Network Controller

Part	GPIO Count	Mounting Type	Frequency	Package Width	Package Name	Package Length	Power - Output	RF Family/Standard	Serial Interfaces	Current - Transmitting	Package / Case	Modulation	Operating Temperature (Min)	Operating Temperature (Max)	Memory Type	Memory Size (ROM)	Memory Size (Flash)	Data Rate (Max)	Current - Receiving	Sensitivity	Type	Voltage - Supply (Maximum)	Voltage - Supply (Minimum)	Protocol
Microchip Technology ATWINC1510B-MU-T	7	Surface Mount	2.4 GHz	5 mm	40-QFN	5 mm	20.5 dBm	WiFi	I2C SPI UART	294 mA	40-VFQFN Exposed Pad	CCK DSSS OFDM	-40 °C	85 °C	Flash ROM	128 kB	8 MB	72.2 Mbps	70.1 mA	-89 dBm	TxRx + MCU	3.6 V	2.7 V	802.11b 802.11g 802.11n
Microchip Technology ATWINC1510B-MU-Y042	7	Surface Mount	2.4 GHz	5 mm	40-QFN	5 mm	20.5 dBm	WiFi	I2C SPI UART	294 mA	40-VFQFN Exposed Pad	CCK DSSS OFDM	-40 °C	85 °C	Flash ROM	128 kB	8 MB	72.2 Mbps	70.1 mA	-89 dBm	TxRx + MCU	3.6 V	2.7 V	802.11b 802.11g 802.11n

Catalog

IEEE 802.11 b/g/n IoT Network Controller

Description

**Microchip's ATWINC1510 is an IEEE 802.11 b/g/n IoT network controller**. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. It connects to any SAM or PIC MCU with minimal resource requirements. The ATWINC1510's most advanced mode is a single stream 1x1 802.11n mode. Its networking stack consists of HTTP, TCP, IP and Ethernet Protocols corresponding to Application, Transport, Internet and Data Link Layers. The **ATWINC1510** features: * A fully integrated Power Amplifier, LNA, Switch and Power Management. * Internal Flash memory to store firmware. * And only requires a high-speed crystal or oscillator (26 MHz) as a clock source. The ATWINC1510 is available in a QFN package or as a [**fully-certified module with u.FL connector or PCB antenna**](https://www.microchip.com/en-us/product/atwinc1500). * **ATWINC1500** has 4 MB of flash memory which can be used for system software * **ATWINC1510** has 8 MB flash memory for even greater flexibility A MCU host driver can be found in the [Advanced Software Framework](https://www.microchip.com/en-us/tools-resources/develop/libraries/advanced-software-framework) (ASF) and in MPLAB(r) [Harmony v3](https://www.microchip.com/en-us/tools-resources/configure/mplab-harmony). Microchip's complimentary and confidential [Wireless Check online design review service](https://www.microchip.com/en-us/support/design-help/design-check-services) is available for customers who have selected our products for their application design-in\*. \*The online design review service is subject to Microchip's [Program Terms and Conditions](https://www.microchip.com/en-us/support/design-help/design-check-services/design-check-services-program-terms-and-conditions) and requires a myMicrochip account. [**Firmware Release Summary**](https://ww1.microchip.com/downloads/en/DeviceDoc/ATWINC15X0_Software_Release_Notes_v19.7.3.pdf)