SST25PF040C Series

4 Mbit 2.3 - 3.6V SPI Serial Flash

Catalog

4 Mbit 2.3 - 3.6V SPI Serial Flash

Part	Memory Size	Operating Temperature [Max]	Operating Temperature [Min]	Memory Organization	Clock Frequency	Technology	Mounting Type	Memory Interface	Write Cycle Time - Word, Page	Memory Format	Memory Type	Supplier Device Package	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case	Package / Case [y]	Package / Case [x]	Grade	Qualification
Microchip Technology SST25PF040CT-40I/NP	512 kb	85 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-UDFN (2x3)	2.3 V	3.6 V	8-UFDFN Exposed Pad
Microchip Technology SST25PF040CT-40E/SN18GVAO	512 kb	125 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-SOIC	2.3 V	3.6 V	8-SOIC	3.9 mm	0.154 in	Automotive	AEC-Q100
Microchip Technology SST25PF040CT-40E/MF	512 kb	125 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-WDFN (5x6)	2.3 V	3.6 V	8-WDFN Exposed Pad
Microchip Technology SST25PF040CT-40I/SN	512 kb	85 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-SOIC	2.3 V	3.6 V	8-SOIC	3.9 mm	0.154 in
Microchip Technology SST25PF040CT-40I/MF18GVAO	512 kb	85 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-WDFN (5x6)	2.3 V	3.6 V	8-WDFN Exposed Pad			Automotive	AEC-Q100
Microchip Technology SST25PF040CT-40V/NP	512 kb	105 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-USON (2x3)	2.3 V	3.6 V	8-UFDFN Exposed Pad
Microchip Technology SST25PF040C-40E/MF	512 kb	125 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-WDFN (5x6)	2.3 V	3.6 V	8-WDFN Exposed Pad
Microchip Technology SST25PF040C-40E/SN	512 kb	125 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-SOIC	2.3 V	3.6 V	8-SOIC	3.9 mm	0.154 in
Microchip Technology SST25PF040C-40I/SN	512 kb	85 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-SOIC	2.3 V	3.6 V	8-SOIC	3.9 mm	0.154 in
Microchip Technology SST25PF040CT-40E/SN	512 kb	125 °C	-40 °C	512 K	40 MHz	FLASH	Surface Mount	SPI	5 ms	FLASH	Non-Volatile	8-SOIC	2.3 V	3.6 V	8-SOIC	3.9 mm	0.154 in

Catalog

4 Mbit 2.3 - 3.6V SPI Serial Flash

Key Features

• * Single Voltage Read and Write Operations- 2.3–3.6V

• * Serial Interface Architecture- SPI Compatible: Mode 0 and Mode 3

• * Dual Input/Output I/O Support

• * High Speed Clock Frequency up to 40 MHz

• * Endurance: 100,000 Cycles (typical)

• * Greater than 20 years Data Retention

• * Active Read Current: 5 mA (typical)

• * Standby Current: 5 µA (typical)

• * Power-down Mode: 3µA (typical)

• * Uniform 4 KByte sectors

• * Uniform 64 KByte overlay blocks

• * Sector-Erase Time: 40 ms (typical)

• * Byte-Program Time: 4 ms/256 bytes (typical)

• * Page Program Mode - 256 Bytes/Page

• * End-of-Write Detection- Software polling the BUSY bit in Status Register

• * Hold Pin (HOLD#)- Suspends a serial sequence to the memorywithout deselecting the device

• * Write Protection (WP#)- Enables/Disables the Lock-Down function of the status register

• * Software Write Protection- Write protection through Block-Protection bits instatus register

• * Temperature Range- Industrial: -40°C to +85°C; Extended: 40°C to +125°C

• * Automotive AEC-Q100 Grade 1 and Grade 3 qualified

• * 8-lead SOIC (150 mils)

• * 8-contact WDFN (6mm x 5mm)

• * 8-contact USON (2mm x 3mm)

• * All devices are RoHS compliant

Description

The 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25PF040C devices are enhanced with extended operating voltage of 2.3-3.6V. SST25PF040C SPI serial flash memories are manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.