dsPIC30F4011 Series
Manufacturer: Microchip Technology
Catalog
Key Features
• High-Performance dsPIC30F core* Modified Harvard architecture
• * C compiler optimized instruction set architecture
• * 24-bit wide instructions, 16-bit wide data path
• * Up to 30 MIPS operation
• * DSP Engine for math intensive operations
• * Modulo and Bit-Reversed Addressing modes
• * Two, 40-bit wide accumulators with optional saturation logic
• * 17-bit x 17-bit single cycle hardware fractional/ integer multiplier
• * Single cycle Multiply-Accumulate (MAC) operation
• * 40-stage Barrel Shifter
• * Dual data fetch
•
• Operating Conditions* Wide operating voltage range (2.5V to 5.5V)
• * Industrial and Extended temperature ranges
•
• Peripheral Features* High current sink/source I/O pins: 25 mA/25 mA
• * Optionally pair up 16-bit timers into 32-bit timer modules
• * 3-wire SPI™ modules (supports 4 Frame modes)
• * I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
• * Addressable UART modules with FIFO buffers
• * 1 CAN module, 2.0B compliant
•
• Motor Control PWM Module Features* Motor Control PWM Module with Complementary or Independent Output modes
• * Edge and Center Aligned modes
• * Multiple duty cycle generators
• * Dedicated time base with 4 modes
• * Programmable output polarity
• * Dead time control for Complementary mode
• * Manual output control
• * Trigger for synchronized A/D conversions
•
• Quadrature Encoder Interface Module Features* QEI with Phase A, Phase B and Index Pulse input
• * 16-bit up/down position counter
• * Count direction status
• * Position Measurement (x2 and x4) mode
• * Programmable digital noise filters on inputs
• * Alternate 16-bit Timer/Counter mode
• * Interrupt on position counter rollover/underflow
•
• Analog Features* 10-bit 1 Msps Analog-to-Digital Converter (A/D)
• * A/D Conversion available during Sleep and Idle
• * 4 Sample/Hold Channels
• * Multiple Conversion Sequencing Options
•
• Special Microcontroller Features* Enhanced Flash program memory with 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
• * Data EEPROM memory with 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
• * Self-reprogrammable under software control
• * Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• * Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
• * Fail-Safe clock monitor operation
• * Detects clock failure and switches to on-chip low power RC oscillator
• * Programmable code protection
• * In-Circuit Serial Programming™ (ICSP™)
• * DC to 40 MHz external clock input
• * 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
• * Programmable Brown-out Detection and Reset generation
• * Sleep, Idle and Alternate Clock modes for power management
Description
AI
dsPIC30F Motor Control 16-bit Digital Signal Controller.
Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.