M24LR16E-R Series

Dynamic NFC/RFID tag IC with 16-Kbit EEPROM, energy harvesting, I2C bus and ISO 15693 RF interface

Catalog

Dynamic NFC/RFID tag IC with 16-Kbit EEPROM, energy harvesting, I2C bus and ISO 15693 RF interface

Part	Supplier Device Package	Standards	Type	Package / Case	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Frequency	Interface	Package / Case [y]	Package / Case [x]	Package / Case [custom]	Package / Case [custom]
STMicroelectronics M24LR16E-RMC6T/2	8-UFDFPN (2x3)	ISO 15693 ISO 18000-3 NFC	RFID Transponder	8-UFDFN Exposed Pad	85 °C	-40 °C	Surface Mount	1.8 V	5.5 V	13.56 MHz	I2C
STMicroelectronics M24LR16E-RMN6T/2	8-SOIC	ISO 15693 ISO 18000-3 NFC	RFID Transponder	8-SOIC	85 °C	-40 °C	Surface Mount	1.8 V	5.5 V	13.56 MHz	I2C	3.9 mm	0.154 in
STMicroelectronics M24LR16E-RDW6T/2	8-TSSOP	ISO 15693 ISO 18000-3 NFC	RFID Transponder	8-TSSOP	85 °C	-40 °C	Surface Mount	1.8 V	5.5 V	13.56 MHz	I2C			0.173 "	4.4 mm

Catalog

Dynamic NFC/RFID tag IC with 16-Kbit EEPROM, energy harvesting, I2C bus and ISO 15693 RF interface

Key Features

• IC interface

- Two-wire I2C serial interface supports 400 kHz protocol

- Single supply voltage:1.8 V to 5.5 V

- Byte and Page Write (up to 4 bytes)

- Random and Sequential read modes

- Self-timed programming cycle

- Automatic address incrementing

- Enhanced ESD/latch-up protection

- I²C timeout

• Contactless interface

- ISO 15693 and ISO 18000-3 mode 1 compatible

- 13.56 MHz ±7k Hz carrier frequency

- To tag: 10% or 100% ASK modulation using 1/4 (26 Kbit/s) or 1/256 (1.6 Kbit/s) pulse position coding

- From tag: load modulation using Manchester coding with 423 kHz and 484 kHz subcarriers in low (6.6 kbit/s) or high (26 kbit/s) data rate mode. Supports the 53 kbit/s data rate with Fast commands

- Internal tuning capacitance: 27.5pF

- 64-bit unique identifier (UID)

- Read Block & Write (32-bit blocks)

• Digital output pin

- User configurable pin: RF write in progress or RF busy mode

• Energy harvesting

- Analog pin for energy harvesting

- 4 sink current configurable ranges

• Temperature range:

- from -40°C up to 85°C

• Memory

- 16-Kbit EEPROM organized into:2048 bytes in I2C mode512 blocks of 32 bits in RF mode

- Write timeI2C: 5 ms (max.)RF: 5.75 ms including the internal Verify time

- Write cycling enduramce:1 million write cycles at 25°C150k write cycles at 85°C

- More than 40-year data retention

- Multiple password protection in RF mode

- Single password protection in I2C mode

• Package:

- ECOPACK2®(RoHS compliant and Halogen-free)

Description

The M24LR16E-R device is a Dynamic NFC/RFID tag IC with dual-interface, electrically erasable programmable memory (EEPROM). It features an I2C interface and can be operated from a VCCpower supply. It is also a contactless memory powered by the received carrier electromagnetic wave. The M24LR16E-R is organized as 2048 × 8 bits in the I2C mode and as 512 × 32 bits in the ISO 15693 and ISO 18000-3 mode 1 RF mode. The M24LR16E-R also features an energy harvesting analog output, as well as a user-configurable digital output pin toggling during either RF write in progress or RF busy mode.