VN5E006ASP-E Series

Single channel high-side driver with analog current sense for automotive applications

Catalog

Single channel high-side driver with analog current sense for automotive applications

Part	Number of Outputs	Switch Type	Voltage - Load [Max]	Voltage - Load [Min]	Package / Case [x]	Package / Case [x]	Package / Case	Features	Supplier Device Package	Mounting Type	Input Type	Ratio - Input:Output [custom]	Operating Temperature [Max]	Operating Temperature [Min]	Interface	Output Type	Rds On (Typ)	Output Configuration	Current - Output (Max) [Max]	Fault Protection
STMicroelectronics VN5E006ASPTR-E
STMicroelectronics VN5E006ASPTR-E	1	General Purpose	28 V	4.5 V	9.4 mm	0.37 in	10-PowerSOIC	Auto Restart	10-PowerSO	Surface Mount	Non-Inverting	1:1	150 °C	-40 °C	On/Off	N-Channel	4.5 mOhm	High Side	63.5 A	Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
STMicroelectronics VN5E006ASPTR-E

Catalog

Single channel high-side driver with analog current sense for automotive applications

Key Features

• General

- Very low standby current

- 3.0 V CMOS compatible inputs

- Optimized electromagnetic emissions

- Very low electromagnetic susceptibility

- Compliance with European directive 2002/95/EC

- Very low current sense leakage

• Diagnostic functions

- Proportional load current sense

- High current sense precision for wide currents range

- Diagnostic enable pin

- Off-state open-load detection

- Output short to VCCdetection

- Overload and short to ground (power limitation) indication

- Thermal shutdown indication

• Protection

- Inrush current active management by power limitation

- Undervoltage shutdown

- Overvoltage clamp

- Load current limitation

- Self limiting of fast thermal transients

- Protection against loss of ground and loss of VCC

- Overtemperature shutdown with auto restart (thermal shutdown)

- Reverse battery protected with self switch of the Power MOSFET

- Electrostatic discharge protection

Description

The VN5E006ASP-E is a single channel high-side driver manufactured using ST proprietary VIPower®M0-5 technology and housed in PowerSO-10 package. The device is designed to drive 12 V automotive grounded loads delivering protection, diagnostics. It also implements a 3 V and 5 V CMOS-compatible interface for use with any microcontroller. The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off with auto-restart and overvoltage active clamp. A dedicated analog current sense pin is associated with every output channel providing enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication, over-temperature indication, short-circuit to VCCdiagnosis and on-state and off-state open-load detection. The current sensing and diagnostic feedback of the whole device can be disabled by pulling the DE pin low to share the external sense resistor with similar devices.