AP22815 Series

3.0A Single Channel Power Distribution Switch With Output Ovp

Catalog

3.0A Single Channel Power Distribution Switch With Output Ovp

Part	Type	Supplied Contents	Utilized IC / Part	Function	Contents	Output Type	Interface	Operating Temperature [Max]	Operating Temperature [Min]	Ratio - Input:Output [custom]	Switch Type	Voltage - Supply (Vcc/Vdd) [Max]	Voltage - Supply (Vcc/Vdd) [Min]	Rds On (Typ)	Mounting Type	Current - Output (Max) [Max]	Output Configuration	Features	Input Type	Supplier Device Package	Number of Outputs	Voltage - Load [Min]	Voltage - Load [Max]	Package / Case	Fault Protection
Diodes Inc AP22815AWT-EVM	Power Management	Board(s)	AP22815A	Power Distribution Switch (Load Switch)	Board(s)
Diodes Inc AP22815BWT-7						N/P-Channel	On/Off	85 °C	-40 °C	1:1	USB Switch	5.5 V	3 V	40 mOhm	Surface Mount	3 A	High Side	Load Discharge Status Flag	Non-Inverting	TSOT-25	1	3 V	5.5 V	SOT-23-5 Thin TSOT-23-5	Over Current Over Temperature Over Voltage Short Circuit

Catalog

3.0A Single Channel Power Distribution Switch With Output Ovp

Key Features

• Input Voltage Range: 3.0V ~ 5.5V

• 40mΩ on-resistance

• Built-in soft-start with 2.1 ms typical rise time

• Fault report (FLG) with blanking time (7ms typ)

• Accurate Adjustable Current Limit, 0.4A~4.0A (AP22615 only)

• ESD protection: 2KV HBM, 200V MM

• Active low or active high enable

• Protection

• Output Over-Voltage with Auto Recovery

• Over Current with Auto Recovery

• Short Circuit with Auto Recovery

• Over temperature with Auto Recovery

• Output Reverse Voltage Protection

• Fast Role Swap function

Description

The AP22815/615 is a 3A/Adjustable single channel current-limited high-side power switch with output OVP optimized for USB and other hot-swap applications which need to have over voltage protection from output to protection the system. The AP22815/615 complies with USB standards and is available with both polarities of Enable input. AP22815 supports fixed current-limited feature, while AP22615 equips adjustable current-limited feature optimized for applications that require precision current limiting support. It supports USB PD3.0 fast role swap function. The output voltage could recovery to USB valid voltage range within 110us during USB PD fast role swap event.