
LTC3207EUF#PBF
Active600MA UNIVERSAL MULTI-OUTPUT LED/CAM DRIVER
Deep-Dive with AI
Search across all available documentation for this part.

LTC3207EUF#PBF
Active600MA UNIVERSAL MULTI-OUTPUT LED/CAM DRIVER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LTC3207EUF#PBF |
|---|---|
| Current - Output / Channel [custom] | 425 mA, 50 mA |
| Dimming | Analog |
| Frequency | 850 kHz |
| Internal Switch(s) | True |
| Mounting Type | Surface Mount |
| Number of Outputs | 13 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 24-WFQFN Exposed Pad |
| Supplier Device Package | 24-QFN (4x4) |
| Topology | Switched Capacitor (Charge Pump) |
| Type | DC DC Regulator |
| Voltage - Supply (Max) | 5.5 V |
| Voltage - Supply (Min) [Min] | 2.9 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 5.67 | |
| 10 | $ 3.89 | |||
| 25 | $ 3.43 | |||
| 100 | $ 3.25 | |||
Description
General part information
LTC3207 Series
The LTC3207/LTC3207-1 are highly integrated multi-display LED drivers. The device contains a high-efficiency, low-noise charge pump to provide power to 12 universal LED current sources and one camera LED current source. The LTC3207/LTC3207-1 require only five small ceramic capacitors to form a complete LED power supply and current controller. In addition there are two I2C addresses available.The display currents are set by an internal precision current reference. Independent dimming, On/Off, blinking and gradation control for all universal current sources is achieved via the I2C serial interface. 6-bit linear DACs are available for adjusting brightness levels for each universal LED current source. The CAM current source has a 4-bit linear DAC to adjust brightness.The LTC3207/LTC3207-1 charge pumps optimize efficiency based on the voltage across the LED current sources. The device powers-up in 1x mode and will automatically switch to boost mode whenever any enabled LED current source begins to enter dropout. The first dropout switches the IC into 1.5x mode and a subsequent dropout switches the LTC3207/LTC3207-1 into 2x mode. The device resets to 1x mode whenever a data register is updated via theI2C port.ApplicationsVideo Phones with QVGA+ Displays
Documents
Technical documentation and resources