MAX507ACWG+T

Active

Analog Devices Inc./Maxim Integrated

VOLTAGE-OUTPUT, 12-BIT DAC WITH INTERNAL REFERENCE AND 12-BIT INTERFACE

Find alt

Alpha

MAX507ACWG+T

Active

Analog Devices Inc./Maxim Integrated

VOLTAGE-OUTPUT, 12-BIT DAC WITH INTERNAL REFERENCE AND 12-BIT INTERFACE

Find alt

Alpha

Description Specifications Series Pricing CAD Documents

Description

General part information

MAX507 Series

The MAX507/MAX508 are complete 12-bit, voltage-output digital-to-analog converters (DACs). The DAC output voltage and the reference have the same polarity, allowing single-supply operation. Both DACs include an internal buried-zener reference. Integrating a DAC, voltage-output amplifier, and reference on one monolithic device greatly enhances reliability over multi-chip circuits. Double-buffered logic inputs interface easily to microprocessors (µPs). Data is transferred into the input register either from a 12-bit-wide data bus (MAX507) for 16-bit µPs, or in a right-justified (8+4)-bit format (MAX508) for 8- or 16-bit µPs. All logic signals are level triggered and are TTL and CMOS compatible. Interface timing specifications insure compatibility with all common µPs.The DACs are specified and tested for both dual-and single-supply operation. Usable supplies range from single +12V to dual ±15V. On-board gain-setting resistors allow three output-voltage ranges: 0V to +5V and 0V to +10V can be generated when using either single or dual supplies. With dual supplies, ±5V is also available. The output amplifier can drive a 2kΩ load to +10V.ApplicationsArbitrary function Waveform GeneratorsAutomated CalibrationAutomatic Test EquipmentDigital Offset and Gain AdjustmentIndustrial ControlsMachine and Motion Control

Technical Specifications

Parameters and characteristics for this part

Specification	MAX507ACWG+T

Architecture	R-2R
Data Interface	Parallel
Differential Output	No
DNL (Max) (LSB)	1 LSB
INL (Max) (LSB)	0.75 LSB
Mounting Type	Surface Mount
Number of Bits	12 bits
Number of D/A Converters	1 count
Operating Temperature (Max)	70 °C
Operating Temperature (Min)	0 °C
Output Type	Voltage - Buffered
Package Length	0.295 in
Package Name	24-SOIC
Package Width	7.5 mm
Reference Type	Internal
Settling Time	5 µs
Voltage - Supply, Analog (Maximum)	15.75 V
Voltage - Supply, Analog (Nominal Negative)	-11.4 V
Voltage - Supply, Analog (Nominal Positive)	11.4 V
Voltage - Supply, Digital (Max)	15.75 V
Voltage - Supply, Digital (Min)	11.4 V

MAX507 Series

Part	Mounting Type	Number of Bits	Data Interface	Number of D/A Converters	Differential Output	Settling Time	Voltage - Supply, Analog (Maximum)	Voltage - Supply, Analog (Nominal Positive)	Voltage - Supply, Analog (Nominal Negative)	Voltage - Supply, Digital (Max)	Voltage - Supply, Digital (Min)	Output Type	INL (Max) (LSB)	DNL (Max) (LSB)	Operating Temperature (Max)	Operating Temperature (Min)	Package Name	Architecture	Reference Type	Package Width	Package Length
Analog Devices Inc./Maxim Integrated MAX507ACNG	Through Hole	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	0.75 LSB	1 LSB	70 °C	0 °C	24-DIP 24-PDIP	R-2R	Internal	7.62 mm	0.3 in
Analog Devices Inc./Maxim Integrated MAX507AEWG+	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	0.75 LSB	1 LSB	85 °C	-40 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507BEWG+	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	1 LSB	1 LSB	85 °C	-40 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507BEWG	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	1 LSB	1 LSB	85 °C	-40 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507BCWG	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	1 LSB	1 LSB	70 °C	0 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507BCWG+	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	1 LSB	1 LSB	70 °C	0 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507BEWG+T	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	1 LSB	1 LSB	85 °C	-40 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507AEWG+T	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	0.75 LSB	1 LSB	85 °C	-40 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507ACWG	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	0.75 LSB	1 LSB	70 °C	0 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in
Analog Devices Inc./Maxim Integrated MAX507BCWG+T	Surface Mount	12 bits	Parallel	1 count	No	5 µs	15.75 V	11.4 V	-11.4 V	15.75 V	11.4 V	Voltage - Buffered	1 LSB	1 LSB	70 °C	0 °C	24-SOIC	R-2R	Internal	7.5 mm	0.295 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Create a free account to access distributor pricing data.

CAD

3D models and CAD resources for this part

Documents

Technical documentation and resources

MAX507ACWG+T | Datasheet

MAX507-MAX508: Voltage-Output, 12-Bit DAC with Internal Reference and 12-Bit Interface Data Sheet (Rev.A)

MAX507 Reliability Data