SST26WF080BT-104I/MF
Active8MB 1.65-1.95V SERIAL QUAD I/O (SQI) FLASH
Deep-Dive with AI
Search across all available documentation for this part.
SST26WF080BT-104I/MF
Active8MB 1.65-1.95V SERIAL QUAD I/O (SQI) FLASH
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | SST26WF080BT-104I/MF | SST26WF080B Series |
|---|---|---|
| Clock Frequency | 104 MHz | 104 MHz |
| Memory Format | FLASH | FLASH |
| Memory Interface | SPI - Quad I/O | SPI - Quad I/O |
| Memory Organization [custom] | 1 M | 1 M |
| Memory Organization [custom] | 8 bits | 8 bits |
| Memory Size | 1024 KB | 1024 KB |
| Memory Type | Non-Volatile | Non-Volatile |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature [Max] | 85 °C | 85 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Package / Case | 8-WDFN Exposed Pad | 8-UFDFN Exposed Pad, 8-WDFN Exposed Pad, 8-SOIC |
| Package / Case | - | 3.9 mm |
| Package / Case | - | 0.154 in |
| Supplier Device Package | 8-WDFN (5x6) | 8-USON (2x3), 8-WDFN (5x6), 8-SOIC |
| Technology | FLASH | FLASH |
| Voltage - Supply [Max] | 1.95 V | 1.95 V |
| Voltage - Supply [Min] | 1.65 V | 1.65 V |
| Write Cycle Time - Word, Page [custom] | 1.5 ms | 1.5 ms |
| Write Cycle Time - Word, Page [custom] | 1.5 ms | 1.5 ms |
SST26WF080B Series
8Mb 1.65-1.95V Serial Quad I/O (SQI) Flash
| Part | Memory Type | Mounting Type | Operating Temperature [Max] | Operating Temperature [Min] | Memory Interface | Memory Format | Memory Organization [custom] | Memory Organization [custom] | Supplier Device Package | Package / Case | Voltage - Supply [Max] | Voltage - Supply [Min] | Clock Frequency | Technology | Memory Size | Write Cycle Time - Word, Page [custom] | Write Cycle Time - Word, Page [custom] | Package / Case [y] | Package / Case [x] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Microchip Technology SST26WF080BT-104I/NP | Non-Volatile | Surface Mount | 85 °C | -40 °C | SPI - Quad I/O | FLASH | 1 M | 8 bits | 8-USON (2x3) | 8-UFDFN Exposed Pad | 1.95 V | 1.65 V | 104 MHz | FLASH | 1024 KB | 1.5 ms | 1.5 ms | ||
Microchip Technology SST26WF080BT-104I/MF | Non-Volatile | Surface Mount | 85 °C | -40 °C | SPI - Quad I/O | FLASH | 1 M | 8 bits | 8-WDFN (5x6) | 8-WDFN Exposed Pad | 1.95 V | 1.65 V | 104 MHz | FLASH | 1024 KB | 1.5 ms | 1.5 ms | ||
Microchip Technology SST26WF080BT-104I/SN | Non-Volatile | Surface Mount | 85 °C | -40 °C | SPI - Quad I/O | FLASH | 1 M | 8 bits | 8-SOIC | 8-SOIC | 1.95 V | 1.65 V | 104 MHz | FLASH | 1024 KB | 1.5 ms | 1.5 ms | 3.9 mm | 0.154 in |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2000 | $ 1.33 | |
| Microchip Direct | T/R | 1 | $ 1.39 | |
| 25 | $ 1.35 | |||
| 100 | $ 1.29 | |||
| 1000 | $ 1.23 | |||
| 5000 | $ 1.14 | |||
Description
General part information
SST26WF080B Series
The SST26WF080B/080BA Serial Quad I/O (SQI) flash device utilizes a 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial flash devices. SST26WF080B/080BA also supports full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. Operating at frequencies reaching 104 MHz, the SST26WF080B/080BA enables minimum latency execute-in-place (XIP) capability without the need for code shadowing on an SRAM. The SST26WF080B/080BA writes (Program or Erase) with a single power supply of 1.65-1.95V and significantly lower power consumption. The device’s low power consumption makes it the ideal choice for Mobile handset, Bluetooth, GPS, camera module, table, hearing aid and any battery powered devices. Further benefits are achieved with SST’s proprietary, high-performance CMOS SuperFlash® technology, which significantly improves performance and reliability.
The **SST26WF080B** default at power up is with WP# and HOLD pins **enable** and SIO2 and SIO3 pins **disable** allowing for SPI protocol operations without register configuration.
The **SST26WF080BA** default at power up is with WP# and HOLD pins **disable** and SIO2 and SIO3 pins **enable** allowing for Quad I/O operations without register configuration.
Documents
Technical documentation and resources