ADG706BRUZ
ActiveCMOS, 2.5 Ω LOW VOLTAGE 16 CHANNEL MULTIPLEXER
Deep-Dive with AI
Search across all available documentation for this part.
ADG706BRUZ
ActiveCMOS, 2.5 Ω LOW VOLTAGE 16 CHANNEL MULTIPLEXER
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | ADG706BRUZ | ADG706 Series |
|---|---|---|
| -3db Bandwidth | 25 MHz | 25 MHz |
| Channel Capacitance (CS(off), CD(off)) [custom] | 13 pF | 13 pF |
| Channel Capacitance (CS(off), CD(off)) [custom] | 180 pF | 180 pF |
| Charge Injection | 8 pC | 8 pC |
| Crosstalk | -80 dB | -80 dB |
| Current - Leakage (IS(off)) (Max) [Max] | 100 pA | 100 pA |
| Mounting Type | Surface Mount | Surface Mount |
| Multiplexer/Demultiplexer Circuit | 16:1 | 16:1 |
| Number of Circuits | 1 | 1 |
| On-State Resistance (Max) [Max] | 4.5 Ohm | 4.5 Ohm |
| Operating Temperature [Max] | 85 °C | 85 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Package / Case | 28-TSSOP | 28-TSSOP |
| Package / Case | 4.4 mm | 4.4 mm |
| Package / Case | 0.173 in | 0.173 in |
| Supplier Device Package | 28-TSSOP | 28-TSSOP |
| Switch Time (Ton, Toff) (Max) | 16 ns, 32 ns | 16 - 32 ns |
| Voltage - Supply, Dual (V±) [Max] | 2.5 V | 2.5 V |
| Voltage - Supply, Dual (V±) [Min] | -2.5 V | -2.5 V |
| Voltage - Supply, Single (V+) [Max] | 5.5 V | 5.5 V |
| Voltage - Supply, Single (V+) [Min] | 1.8 V | 1.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
ADG706 Series
CMOS, 2.5 Ω Low Voltage 16 Channel Multiplexer
| Part | Multiplexer/Demultiplexer Circuit | Supplier Device Package | Switch Time (Ton, Toff) (Max) | Charge Injection | Crosstalk | Package / Case | Package / Case | Package / Case | Voltage - Supply, Single (V+) [Max] | Voltage - Supply, Single (V+) [Min] | On-State Resistance (Max) [Max] | Current - Leakage (IS(off)) (Max) [Max] | -3db Bandwidth | Mounting Type | Operating Temperature [Max] | Operating Temperature [Min] | Number of Circuits | Channel Capacitance (CS(off), CD(off)) [custom] | Channel Capacitance (CS(off), CD(off)) [custom] | Voltage - Supply, Dual (V±) [Min] | Voltage - Supply, Dual (V±) [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices Inc ADG706BRUZ-REEL7The ADG706 andADG707are low-voltage, CMOS analog multiplexers comprising 16 single channels and eight differential channels, respectively. The ADG706 switches one of 16 inputs (S1–S16) to a common output, D, as determined by the 4-bit binary address lines A0, A1, A2, and A3. The ADG707 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF.Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG706 and ADG707 ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. These devices are also designed to operate from a dual supply of ±2.5 V.These multiplexers are designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed, very low ON resistance, and leakage currents. ON resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies.The ADG706 and ADG707 are available in small 28-lead TSSOP packages.Product HighlightsSingle-/dual-supply operation. The ADG706 and ADG707 are fully specified and guaranteed with 3 V and 5 V single-supply and ±2.5 V dual-supply rails.Low ON resistance (2.5 Ω typical)Low-power consumption (<0.01 µW)Guaranteed break-before-make switching actionSmall 28-lead TSSOP packageApplicationsData acquisition systemsCommunication systemsRelay replacementAudio and video switchingBattery-powered systems | 16:1 | 28-TSSOP | 16 ns, 32 ns | 8 pC | -80 dB | 28-TSSOP | 4.4 mm | 0.173 in | 5.5 V | 1.8 V | 4.5 Ohm | 100 pA | 25 MHz | Surface Mount | 85 °C | -40 °C | 1 | 13 pF | 180 pF | -2.5 V | 2.5 V |
Analog Devices Inc ADG706BRUZ-REELThe ADG706 andADG707are low-voltage, CMOS analog multiplexers comprising 16 single channels and eight differential channels, respectively. The ADG706 switches one of 16 inputs (S1–S16) to a common output, D, as determined by the 4-bit binary address lines A0, A1, A2, and A3. The ADG707 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF.Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG706 and ADG707 ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. These devices are also designed to operate from a dual supply of ±2.5 V.These multiplexers are designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed, very low ON resistance, and leakage currents. ON resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies.The ADG706 and ADG707 are available in small 28-lead TSSOP packages.Product HighlightsSingle-/dual-supply operation. The ADG706 and ADG707 are fully specified and guaranteed with 3 V and 5 V single-supply and ±2.5 V dual-supply rails.Low ON resistance (2.5 Ω typical)Low-power consumption (<0.01 µW)Guaranteed break-before-make switching actionSmall 28-lead TSSOP packageApplicationsData acquisition systemsCommunication systemsRelay replacementAudio and video switchingBattery-powered systems | 16:1 | 28-TSSOP | 16 ns, 32 ns | 8 pC | -80 dB | 28-TSSOP | 4.4 mm | 0.173 in | 5.5 V | 1.8 V | 4.5 Ohm | 100 pA | 25 MHz | Surface Mount | 85 °C | -40 °C | 1 | 13 pF | 180 pF | -2.5 V | 2.5 V |
Analog Devices Inc ADG706BRUZThe ADG706 andADG707are low-voltage, CMOS analog multiplexers comprising 16 single channels and eight differential channels, respectively. The ADG706 switches one of 16 inputs (S1–S16) to a common output, D, as determined by the 4-bit binary address lines A0, A1, A2, and A3. The ADG707 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF.Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG706 and ADG707 ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. These devices are also designed to operate from a dual supply of ±2.5 V.These multiplexers are designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed, very low ON resistance, and leakage currents. ON resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies.The ADG706 and ADG707 are available in small 28-lead TSSOP packages.Product HighlightsSingle-/dual-supply operation. The ADG706 and ADG707 are fully specified and guaranteed with 3 V and 5 V single-supply and ±2.5 V dual-supply rails.Low ON resistance (2.5 Ω typical)Low-power consumption (<0.01 µW)Guaranteed break-before-make switching actionSmall 28-lead TSSOP packageApplicationsData acquisition systemsCommunication systemsRelay replacementAudio and video switchingBattery-powered systems | 16:1 | 28-TSSOP | 16 ns, 32 ns | 8 pC | -80 dB | 28-TSSOP | 4.4 mm | 0.173 in | 5.5 V | 1.8 V | 4.5 Ohm | 100 pA | 25 MHz | Surface Mount | 85 °C | -40 °C | 1 | 13 pF | 180 pF | -2.5 V | 2.5 V |
Description
General part information
ADG706 Series
The ADG706 andADG707are low-voltage, CMOS analog multiplexers comprising 16 single channels and eight differential channels, respectively. The ADG706 switches one of 16 inputs (S1–S16) to a common output, D, as determined by the 4-bit binary address lines A0, A1, A2, and A3. The ADG707 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF.Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG706 and ADG707 ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. These devices are also designed to operate from a dual supply of ±2.5 V.These multiplexers are designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed, very low ON resistance, and leakage currents. ON resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies.The ADG706 and ADG707 are available in small 28-lead TSSOP packages.Product HighlightsSingle-/dual-supply operation. The ADG706 and ADG707 are fully specified and guaranteed with 3 V and 5 V single-supply and ±2.5 V dual-supply rails.Low ON resistance (2.5 Ω typical)Low-power consumption (<0.01 µW)Guaranteed break-before-make switching actionSmall 28-lead TSSOP packageApplicationsData acquisition systemsCommunication systemsRelay replacementAudio and video switchingBattery-powered systems