
LTC222CS#PBF
ActiveMICROPOWER, LOW CHARGE INJECTION, QUAD CMOS ANALOG SWITCHES WITH DATA LATCHES
Deep-Dive with AI
Search across all available documentation for this part.

LTC222CS#PBF
ActiveMICROPOWER, LOW CHARGE INJECTION, QUAD CMOS ANALOG SWITCHES WITH DATA LATCHES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LTC222CS#PBF |
|---|---|
| Charge Injection | 8 pC |
| Current - Leakage (IS(off)) (Max) | 5 nA |
| Mounting Type | Surface Mount |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) [Max] | 90 Ohm |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 16-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 16-SO |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) [custom] | 400 ns |
| Switch Time (Ton, Toff) (Max) [custom] | 300 ns |
| Voltage - Supply, Dual (V±) [Max] | 15 V |
| Voltage - Supply, Dual (V±) [Min] | -15 V |
| Voltage - Supply, Single (V+) | 5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 10.45 | |
| 10 | $ 7.12 | |||
| 50 | $ 5.71 | |||
| 100 | $ 5.26 | |||
| 250 | $ 4.86 | |||
Description
General part information
LTC222 Series
The LTC221 and LTC222 are micropower, quad CMOS analog switches which typically dissipate only 250µW from ±15V supplies and 40µW from a single 5V supply. Onboard latches allow the LTC221 and LTC222 to interface directly to most microprocessor buses. The switches have 65 Ohms typical on resistance and a very high off resistance. A break before make characteristic is inherent in these switches to prevent the shorting of two channels. The signal range is ±15V with a supply voltage of ±15V and 0V to 5V with a single 5V supply. The switches have special charge compensation circuitry which greatly reduces charge injection to a maximum of ±25pC (±15V supplies).The LTC221 and LTC222 are designed for applications such as microprocessor controlled programmable gain amplifiers, automatic test equipment, communication systems, and data acquisition systems. The LTC221 is normally closed and the LTC222 is normally open as shown in the Logic Table.ApplicationsSupply Current..................I+ = 40µA, I- = 5µA MaxCharge Injection±15V Supplies.................. ±25pC MaxSingle 5V Supply.................. 2pC TypRON................... 65 Ohms TypSignal Range.................... ±15V
Documents
Technical documentation and resources