The VMEBP07P00 is a 6U Thermoplastic Standard Backplane with seven slots. It is designed to meet VME bus specification Rev. C1 and Rev. D. All termination is placed inboard of the two end connectors to allow the maximum number of slots in a 19-inch RETMA rack. The combining of the J1 and J2 in an 8-layer single construction permits the copper layers for power and ground to be continuously distributed. Decoupling capacitors are provided at the ends and may be added at slot intervals at any time as needed. The resulting improved power distribution as well as signal shielding in ground layers creates a high performance backplane with low signal cross talk. Controlled impedance in both J1 and J2 sections and low propagation delay also results. Holes and pads coated with 0.0003-inch minimum 63/37 to 60/40 tin-lead solder.